- DL manuals
- Vacuubrand
- Controller
- CVC 2
- Instructions For Use Manual
Vacuubrand CVC 2 Instructions For Use Manual - Description
page 7 of 36
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 99 90 20 / 01/12/2004
Description
Display
selectable
pressure units
cooling water valve
isolation valve
Operating the controller is possible in four different basic setups, see ”Changing the
basic setup”.
The status of the controller respectively of the connected accessories is displayed by
corresponding symbols on the LCD. After switching on the controller, the version of
the software is displayed, then the preselected basic setup. The solenoid operated
isolation valve is switched if connected (automatic identification), the cooling water
valve is switched, if the valve is configurated.
Pressure reading
process control
active
basic setup
VACUU•LAN
warning symbol
(in combination with other symbols)
pump symbol
pressure control
setting pressure
or hysteresis
settings
countdown till switch off
Summary of CVC 2
Page 1
Page 1 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 vacuum controller cvc 2 ii technology for vacuum systems instr...
Page 2
Page 2 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 after sales service: contact your local dealer or call (++49) ...
Page 3: Contents
Page 3 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 attention! Important notes! Not permitted! Misuse may cause da...
Page 4: Safety Information!
Page 4 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 safety information! Remove all packing material, remove the pr...
Page 5
Page 5 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 adopt suitable measures to prevent dangers arising from danger...
Page 6: Technical Data
Page 6 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 we reserve the right for technical modification without prior ...
Page 7: Description
Page 7 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 description display selectable pressure units cooling water va...
Page 8: Cvc 2
Page 8 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 keys rear side mains switch male connector for mains cable thr...
Page 9: Ready to
Page 9 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 setting pressure unit (mbar / torr / hpa) configuration of the...
Page 10: Mbar
Page 10 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 how to work with the controller how to change the pressure un...
Page 11
Page 11 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 general view basic setup ”standard” configurate cooling water...
Page 12: Basic Setup Standard
Page 12 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 basic setup standard venting short venting (e. G. In case of ...
Page 13: 267
Page 13 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 ➨ set hysteresis ∆p by using keys ∆p▲ or ∆p▼: ☞ set mode is a...
Page 14: 520
Page 14 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 ➨ start: press key start/stop. ☞ arrow down and valve and/or ...
Page 15
Page 15 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 example basic setup standard: pc 510 connected to a rotary ev...
Page 16
Page 16 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 attention: the basic setups management, management plus or va...
Page 17
Page 17 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 d e t c e n n o c s t n e n o p m o c d e r i s e d n o i t a...
Page 18
Page 18 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 how to change the basic setup starting the program: ➨ press k...
Page 19: Set
Page 19 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 after setting the basic setup: ☞ the symbol of the cooling wa...
Page 20: Plus
Page 20 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 basic setup management or management plus starting and stoppi...
Page 21
Page 21 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 coolant example basic setup management: mz 2c + ak + ek, with...
Page 22
Page 22 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 general view basic setup vacuu•lan connect cooling water valv...
Page 23: Basic Setup Vacuu•lan
Page 23 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 basic setup vacuu•lan venting short venting (e. G. In case of...
Page 24: 247
Page 24 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 setting the process parameter setting the time for automatic ...
Page 25
Page 25 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 example basic setup vacuu•lan: pc 510, vacuu•lan ® components...
Page 26
Page 26 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 how to determine the best distillation conditions measure the...
Page 27: Installation and Accessories
Page 27 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 installation and accessories components the vacuubrand chemis...
Page 28
Page 28 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 cooling water minimization cooling water valve 24 v= ...........
Page 29: Troubleshooting
Page 29 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 troubleshooting t l u a f e s u a c e l b i s s o p y d e m e...
Page 30
Page 30 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 instructions for repair with directions for repair and spare ...
Page 31: Readjustment
Page 31 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 the device was adjusted using factory standards, which are tr...
Page 32: Calibration In The Factory
Page 32 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 calibration in the factory control of measuring equipment the...
Page 33
Page 33 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 notes on return to the factory repair - return - dkd calibrat...
Page 34
Page 34 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 health and safety clearance form declaration concerning safet...
Page 35
Page 35 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 konformitätserklärung declaration of conformity déclaration d...
Page 36
Page 36 of 36 documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully the validity of this document with respect to his product. Manual-no.: 99 90 20 / 01/12/2004 disclaimer: our technical literature is only intended to info...