VADcore GoIP4 User Manual

Manual is about: Four-Channel GSM VoIP Gateway

Summary of GoIP4

  • Page 1

    User manual four-channel gsm voip gateway model: goip4 version 1.0, 2010/03 tel: +1 (650) 963-7600 sales@vadcore.Com support@vadcore.Com www.Vadcore.Com.

  • Page 2

    Four-channel gsm voip gateway 1 contents 1 product introduction.................................................................................................. 3 1.1 general information.....................................................................................................3 1.2 protoc...

  • Page 3

    Four-channel gsm voip gateway 2 3.4.5 codec preference.................................................................................................................... 26 3.5 call divert..................................................................................................................

  • Page 4

    Four-channel gsm voip gateway 3 1 product introduction 1.1 general information a voip gsm gateway enables direct routing between ip and gsm network without the use of a fxo port or the pstn network. With this device, the usage of voip is greatly enhanced with significant savings on long distance and...

  • Page 5

    Four-channel gsm voip gateway 4 internet control message protocol (icmp) tftp client hyper text transfer protocol (http) dynamic host configuration protocol (dhcp) domain name system (dns) user account authentication using md5 out-band dtmf relay: rfc 2833 and sip info 1.3 hardware specification arm...

  • Page 6

    Four-channel gsm voip gateway 5 1.6 appearance.

  • Page 7

    Four-channel gsm voip gateway 6 1 ) ) ) ) lan connect this port to an ethernet switch/router, the ethernet of a dsl modem, or other network access equipment. 2 ) ) ) ) pc connect a computer or other network device to this port. 3 ) ) ) ) power (dc12v/2000ma) connect the 12v/2000ma adapter provided t...

  • Page 8

    Four-channel gsm voip gateway 7 2 installation 2.1 installation steps please follow the connection diagram above to install the goip4 gateway. A) insert a gsm sim card in the sim card compartment located at the bottom of the goip4 gateway. B) connect an ethernet cable the lan port of the goip4 gatew...

  • Page 9

    Four-channel gsm voip gateway 8 2.2 led indicators the following table defines the status of the leds located on the top case and on the rj-45 connectors. Led description p0wer when goip4 working, this led will keep light. Run 1. When the goip4 is booting , this led will flash 100ms on and 100ms off...

  • Page 10

    Four-channel gsm voip gateway 9 reboot device reboot password not case-sensitive note : : : : in command reset and reboot, the password is the goip4 device’s admin password. The command keywords can be majuscule and lowercase, but the password is case-sensitive. 1 》 obtain lan port ip address once t...

  • Page 11

    Four-channel gsm voip gateway 10 3 configuration guide to configure the goip4 gateway, you must login to its web server via the lan or pc port. The lan port is factory preset to ip address 192.168.0.100 and the pc port is set to the fixed ip 192.168.8.1. If you lose the ip address information for la...

  • Page 12

    Four-channel gsm voip gateway 11 3.1 web configuration menu if your computer is connected to the goip4 gateway via the lan port, you need to type the lan ip address of the goip4 gateway in your web browser to access the web server of the goip4 gateway. The default ip address on the lan port is “192....

  • Page 13

    Four-channel gsm voip gateway 12 3.2 status the status page shown below is the default / home page of the goip4 web server..

  • Page 14

    Four-channel gsm voip gateway 13 3.2.1 phone information a. Serial number each gateway has a unique serial number assigned by the factory such as goip409100019 . This number is important for centralized configuration, technical support, and warranty. This number is printed on the bottom of the gatew...

  • Page 15

    Four-channel gsm voip gateway 14 this field displays login; otherwise, it displays logout. 3.2.2 network information a. Lan port configuration this field displays the status of the lan port. B. Pc port configuration this field displays the status of the lan port. C. Pppoe if pppoe is enabled, it dis...

  • Page 16

    Four-channel gsm voip gateway 15 click on “ preference” in the left menu of the configuration web, and the screen will be displayed as below: 3.3.1 language currently goip4 only supports english. Vadcore also has other versions of software that support simplified chinese and traditional chinese. Con...

  • Page 17

    Four-channel gsm voip gateway 16 3.3.2 time zone and time server the goip4 gateway supports network time protocol (ntp) to obtain the date and time information from an ntp server (time server). The time zone is specified as in gmt ± offset. For example, the pacific standard time is gmt-8, and the pa...

  • Page 18

    Four-channel gsm voip gateway 17 each tone listed above is defined in the following format: nc, rpt, c1on, c1off, c2on, c2off, c3on, c3off, f1, f2, f3, f4, p1, p2, p3, p4 where: nc is the number of cadences rpt is the repeat counter(0 - infinite, 1~n - repeat 1~n times) c1on is the cadence one on (i...

  • Page 19

    Four-channel gsm voip gateway 18 3.3.6 gsm band goip4 supported quad gsm bands: 850mhz, 900mhz, 1800mhz, 1900mhz. Select the correct gsm bands that are used in your country. 3.3.7 gsm isp goip4 will show you a list of gsm isps when goip4 completes a search of isps. You can choose the isp from the li...

  • Page 20

    Four-channel gsm voip gateway 19 single server mode: all four channels use same sip account to connect to sip server. Multiple server mode: each channel use its own sip account to connect to sip server. Trunk gateway mode: goip4 will act as a sip proxy. Remote sip clients can register to goip4 and g...

  • Page 21

    Four-channel gsm voip gateway 20 registration, the current registration will time out. Check your sip server for a reasonable value. F) outbound proxy outbound proxy is a device that receives requests from a client, even though it may not be the server resolved by the request-uri. Outbound proxy wil...

  • Page 22

    Four-channel gsm voip gateway 21 3.4.2 advanced settings click on “ advance settings” tab on the top right corner of the call setting page to display all the parameters for programming, as shown below. These parameters allow more advanced control over the sip signaling and media preference. A ) ) ) ...

  • Page 23

    Four-channel gsm voip gateway 22 3.4.3 advanced timing a) no answer expiry(32-180s), nict expiry(2-180s), retransmit t1(200-2000ms), retransmit t2(2000-8000ms) some sip proxies may have special timing requirements. Change these parameters as required. B ) ) ) ) dtmf signaling 1 ) ) ) ) dtmf type dtm...

  • Page 24

    Four-channel gsm voip gateway 23 2 ) ) ) ) dtmf payload type dtmf payload type is defined by rfc2833 protocol to carry the tone definitions for various applications. The default dtmf payload type is 101. Please consult your voip service provider for the proper setting if required. C ) ) ) ) signalin...

  • Page 25

    Four-channel gsm voip gateway 24 a ) ) ) ) rtp port range this parameter specifies the range of the rtp (real time protocol) ports used by the goip4 gateway. If your network limits the usable port range, this parameter may need to be modified. Please consult your network administrator for more infor...

  • Page 26

    Four-channel gsm voip gateway 25 goip4 gateway supports different encryptions for voice media. Select the one that you prefer. F ) ) ) ) symmetric rtp normally goip4 gateway uses rtp ports based on the configuration. If this box is checked, goip4 gateway will identify rtp ports from the media traffi...

  • Page 27

    Four-channel gsm voip gateway 26 3.4.5 codec preference click on “ media settings” in the “call setting” menu and click audio codec preference to access the parameters. Codec preference allows a user to select the codes to be used and its priority for a voice call. Click on the check box to enable a...

  • Page 28

    Four-channel gsm voip gateway 27 3.5 call divert the call divert feature controls the routing of calls between voip and gsm. 3.5.1 call forward (from voip to pstn) forward number.

  • Page 29

    Four-channel gsm voip gateway 28 enter a phone number in this field will forward all incoming voip calls to this phone number (pstn or mobile). Using “,” to add a 500ms delay to the dialing sequence. When forward number field has a phone number, goip4 will automatically forward all voip calls to thi...

  • Page 30

    Four-channel gsm voip gateway 29 4) password or trust list callers will be able to use goip4 for gsm connection if their phone numbers are on trust phone number list or if they have the password. Sim card settings 1) sim card expiry - usage limit (minutes) 2) sim card state report number - the recip...

  • Page 31

    Four-channel gsm voip gateway 30 forward to voip auth mode this field sets protection for using the gsm connection to voip. 5) no auth anyone can make phone calls through goip4. 6) password if a password is entered, the goip4 will generate an indication tone and wait for the caller to dial the passw...

  • Page 32

    Four-channel gsm voip gateway 31 server is required to work with goip4 gateway for sms sender. Please contact vadcore for more details. 3.6.2 sms call out goip4 gateway supported sms call. In this mode, when goip4 gateway receives a sms from a mobile phone, it will automatically make a call to sip s...

  • Page 33

    Four-channel gsm voip gateway 32 a mobile phone’s number is (86)13800000000, it sends a sms “8675588228822” to goip4’s gsm sim card. When goip4 device receives this sms, it will automatically call the number 8675588228822, and the caller is number 8613800000000. The sent-out signaling as follow: b. ...

  • Page 34

    Four-channel gsm voip gateway 33 mode 2 example: goip4 use sms dial mode 2: a mobile phone’s number is (86)13800000000, it sends a sms “8675588228822” to goip4’s gsm sim card. When goip4 device receives this sms, it will automatically call the number 8675588228822, and the caller number is goip4’s s...

  • Page 35

    Four-channel gsm voip gateway 34 sms prefix can be used in mode 2 just like in mode 1. Mode 3 example: goip4 use sms dial mode 3: a mobile phone’s number is (86)13800000000, it sends a sms “8675588228822” to goip4’s gsm sim card. When goip4 device receives this sms, it will automatically call the nu...

  • Page 36

    Four-channel gsm voip gateway 35 sms prefix can be used in mode 3 just like in mode 1. 3.6.3 sms relay goip4 gsm gateway supports sms relay. The sms forward number is the receiver (ex. An extension) on your voip system. Goip4 will forward the sms it received to the number. 3.6.3.1 sms relay to voip ...

  • Page 37

    Four-channel gsm voip gateway 36 3.6.3.2 sms relay to gsm network when goip4 receives a message from sip server as below: the goip4 will send a sms to gsm number 13682626800 , the sms content is “ hello world ”..

  • Page 38

    Four-channel gsm voip gateway 37 3.7 gsm caller id transparent goip4 supports gsm caller id transparent to voip via sip invite signaling. A) disable: disable gsm caller id transparent to voip. B) use remote party id: goip4 will add caller id in sip invite’s remote party id option. C) use cid as sip ...

  • Page 39

    Four-channel gsm voip gateway 38 3.8 gsm group mode goip4 can group multiple devices together and provide line-hunt. The group mode works like a multi-channels gsm gateway. Any goip4’s channel can work as group server mode or client mode..

  • Page 40

    Four-channel gsm voip gateway 39 server mode: only one gsm channel runs in server mode. The gsm channel that is set in server mode will forward the gsm’s incoming calls to other available client channels. The gsm channel that is set in server mode will be your main number for your customer. Client m...

  • Page 42

    Four-channel gsm voip gateway 41 2. Dial plan = “1:+00” means that two digits “00” will be added in front of the number when the first digit of the dialed number is “1”. A) number entered = “1082121234”, actual number dialed = “00182121234”. B) number entered = “82121234”, actual number dialed = “82...

  • Page 43

    Four-channel gsm voip gateway 42 note: a too low or too high gain may affect the sensitivity of dtmf detections. 3.11 network configuration click on “ network” tab in the left menu column to configure the lan and pc ports..

  • Page 44

    Four-channel gsm voip gateway 43 3.11.1 lan port three lan port modes are supported: dhcp, static ip and pppoe. The default is set for static ip with default ip address “192.168.0.100”. 1 ) ) ) ) dhcp choose dhcp if a local dhcp host is available. This allows the goip4 gateway to obtain network info...

  • Page 45

    Four-channel gsm voip gateway 44 the default setting of goip4 is static ip with ip address “192.168.0.100” and subnet mask “255.255.255.0”. However, default route, primary dns, and secondary dns (optional) must be manually entered according to your network configuration. 3 ) ) ) ) pppoe pppoe is a c...

  • Page 46

    Four-channel gsm voip gateway 45 3.11.2 pc port configurations the pc port allows other network devices to be attached to the goip4 gateway. It offers both bridge and static ip modes to meet your requirements. The factory preset is static ip mode with the ip address 192.168.8.1. 1 ) ) ) ) bridge mod...

  • Page 47

    Four-channel gsm voip gateway 46 specify the starting address, ending address, and static dns accordingly. 4 ) ) ) ) advanced the advanced settings allow the user to set the broadcast address and to clone a mac address instead of using the factory preset mac address. Please consult your network admi...

  • Page 48

    Four-channel gsm voip gateway 47 3.14.1 online upgrade to perform a firmware upgrade, select the online upgrade tab to access the page below. Enter the update link as provided by vadcore. A sample link is: hk.Ippcn.Com/update/ghs-3.01-18.Pkg click the start button to start the firmware upgrade. Warn...

  • Page 49

    Four-channel gsm voip gateway 48 a ) ) ) ) user password this is the password for the user id “ user”. The default password is “1234”. This user id has limited access to the network configuration menu. B ) ) ) ) administrator password (default: admin) this is the password for the user id “ admin”. T...

  • Page 50

    Four-channel gsm voip gateway 49 4 hardware specifications characteristics of the hardware parameter remarks processor arm9e 133mhz dsp vpdsp101-4 100mhz ram 16m flash 4m power dc12v/2000ma +-10% input ac100v to ac240v default 850mhz/1900mhz gsm module type optional 900mhz/1800mhz consumption the ma...

  • Page 51

    Four-channel gsm voip gateway 50 time zone gmt +8.