- DL manuals
- VADDIO
- IP Camera
- ConferenceSHOT 10
- Installation Manual
VADDIO ConferenceSHOT 10 Installation Manual
Summary of ConferenceSHOT 10
Page 1
Installation guide for conferenceshot 10 enterprise-class ptz conferencing camera document 411-0002-31 rev c january 2017.
Page 2: Contents
Ii contents overview 3 what's in this guide 3 features 3 unpacking the camera 4 a quick look at the camera 6 back of the camera 6 switch settings 6 installation 8 before you install the camera 8 don’t void your warranty! 8 cabling notes 9 installing the wall mount 10 about ceiling-mounted cameras 10...
Page 3
3 overview this guide covers the conferenceshot 10 enterprise-class ptz conferencing camera: n conferenceshot 10 camera (silver), north america – part number 999-9990-000 n conferenceshot 10 camera (silver), europe and uk – part number 999-9990-001 n conferenceshot 10 camera (white), north america –...
Page 4
Unpacking the camera make sure you received all the items you expected. Here are the packing lists for the conferenceshot 10 cameras. Caution: use the power supply shipped with the camera. Using a different power supply may create an unsafe operating condition or damage the camera, and will void the...
Page 5
Europe and uk conferenceshot 10 camera, silver/black, part number 999-9990-001 conferenceshot 10 camera, white, part number 999-9990-001w the box should contain one of each item listed here: n camera, part number 998-9990-000 (silver/black) or 998-9990-000w (white) n vaddio ir remote commander n 12 ...
Page 6
A quick look at the camera n camera and zoom lens: the conferenceshot 10 camera features a 10x optical zoom lens (11x in super-wide mode). N ir sensors: sensors in the front of the camera base receive signals from the remote. Make sure there's nothing directly in front of the camera base, and point ...
Page 7
When the camera is right side up, switches are in their default positions when they are up. Ir frequency selection:the ir remote commander can control up to three cameras in the same room with different ir frequencies. Use switches 1 and 2 to select the frequency to identify the camera as camera 1, ...
Page 8
Installation this section covers siting the camera, installing the mount, and installing the camera. Before you install the camera all conferenceshot cameras include a wall mount. N choose a camera mounting location that will optimize camera performance. Consider camera viewing angles, lighting cond...
Page 9
Cabling notes for rj-45 terminated cables, use cat-5e or better cable and standard rj-45 connectors (568b termination). We recommend using high-quality connectors and crimping tools. A de-9f (db-9f) adapter is supplied with the camera for making rs-232 connections to a third-party control system suc...
Page 10
Installing the wall mount you can install the camera wall mount to a 2-gang wall box or directly to the drywall. N if you mount it to drywall, use the wall anchors provided with the wall mount. N if you mount it to a wall box, use the cover plate screws supplied with the wall box. Note dome installa...
Page 11
Installing the camera caution before you start, be sure you can identify all cables correctly. Connecting a cable to the wrong port can result in equipment damage. Caution: check cat-5 cables for continuity before using them. Using the wrong pin-out may damage the camera system and void the warranty...
Page 12
Connecting the camera here is an example of how the camera might be set up in a medium-size conference room. In this setup, a pc uses a unified communications conferencing application to manage the camera and an easyusb mixer/amp with attached microphones and speakers. Note conferenceshot 10 camera ...
Page 13
Next steps the camera is now ready to configure and use. This information is available in the configuration and administration guide for conferenceshot 10 enterprise-class ptz conferencing camera. It is also included in the integrator's complete guide to conferenceshot 10 enterprise-class ptz confer...
Page 14
Compliance statements and declarations of conformity compliance testing was performed to the following regulations: fcc part 15 (15.107, 15.109), subpart b class a ices-003, issue 54: 2012 class a emc directive 2004/108/ec class a en 55022: december 2010 class a en 55024: november 2010 class a kn22 ...
Page 15
European compliance this product has been evaluated for electromagnetic compatibility under the emc directive for emissions and immunity and meets the requirements for a class a digital device. In a domestic environment this product may cause radio interference in which case the user may be required...
Page 16
Warranty information see vaddio warranty, service and return policies posted on support.Vaddio.Com for complete details. Hardware* warranty: two (2) year limited warranty on all parts and labor for vaddio manufactured products. Vaddio warrants its manufactured products against defects in materials a...
Page 17
Index a anatomy of the camera 6 c cable connectors 6, 9 camera mount 8, 10 installing 10 camera placement 8 ceiling-mounted cameras 10 cleaning 13 color codes for status light 12 connection diagram 12 connectors 6 d damage, preventing 4, 8-9 diagram, connection 12 dip switches 6 location 6 settings ...
Page 18
Vaddio is a brand of milestone av technologies · www.Milestone.Com phone 800.572.2011 / +1.763.971.4400 · fax +1.763.971.4464 · email info@vaddio.Com visit us at support.Vaddio.Com for firmware updates, specifications, drawings, manuals, technical support information, and more. Vaddio, conferencesho...