VADDIO WallView HD1 CCU with HSDS Technical Features & Specifications
©2008 Vaddio – All Rights Reserved. Reproduction in whole or in part without written permission is prohibited. Vaddio, EZIM, HSDS,
ProductionVIEW, Quick-Connect, WallVIEW, PowerRite, are registered trademarks of Vaddio. All other trade marks are property of
their respective owners. Document Number 101708 Rev C.
W
W
A
A
L
L
L
L
V
V
I
I
E
E
W
W
™
™
C
C
C
C
U
U
H
H
D
D
1
1
W
W
I
I
T
T
H
H
H
H
S
S
D
D
S
S
™
™
Featuring the Vaddio™ Quick-Connect™ CCU
The Vaddio WallVIEW CCU HD1 is built around the
Sony® EVI-HD1 high definition pan/tilt/zoom camera.
With a 2 mega-pixel CMOS sensor, the EVI-HD1 is an
ideal choice for a wide range of high definition video
applications. WallVIEW CCU HD1 allows the user to
adjust color, gain and iris functions of the camera (see
Figure 1). These controls allow the camera to deliver a
more accurate representation of the image that is being
captured. The other added advantages include the ability
to color match multiple cameras and make necessary
changes to iris and gain quickly and easily. Settings may
be stored by using two Scene buttons, for various lighting
conditions.
The WallVIEW CCU HD1 uses high speed differential
signaling (HSDS), an active video transmission system, to
deliver high quality HD or SD video over standard Cat. 5
cabling. Adjustments allow the video to be extended up
to 500 feet from the Quick-Connect CCU with virtually no
loss in video quality.
Overall, the WallVIEW CCU HD1 is superb for a wide range of high definition shooting applications. It is also
highly suitable for applications where adjusting the color and brightness levels of one or multiple cameras is
critical, such as houses of worship, corporate boardrooms, live event production and distance-learning
applications.
W
HAT’S
I
NCLUDED
• Sony EVI-HD1 High Definition PTZ Camera
(1/3 Type, 2 megapixel CMOS sensor with
10x zoom lens)
• EZCamera Interface Module CCU (EZIM)
• Vaddio EZIM HD Break-out Cable*
• Vaddio Quick-Connect CCU (QCCU) 1-RU
Rack Mount Interface
• Sony IR Remote
• EZCamera Control Adapter (RJ-45 to DB-9)
• 36V PowerRite™ Power Supply
• Vaddio Thin Profile Wall Mount HD1
• Mounting Hardware & Documentation
* Optional EZIM SD Break-out Cable sold separately
T
ECHNICAL
F
EATURES
CCU Controls
CCU controls on the product include: Red &
Blue Gain; Aperture; Auto & Manual Iris; Gain;
Auto & One Push White Balance; and Scene
Store A & B buttons.
EZCamera Interface Module (EZIM)
The EZCamera Interface Module CCU is a small
camera interface module that mounts inside the
wall mount and is a universal interface for several
HD or SD PTZ cameras available today. The
EZIM uses a multi-pin connector and cable
assemblies for maximum flexibility.
Quick-Connect CCU
The 1-RU interface has (high definition) analog
component video outputs (Y, Pb, Pr) for 1080i
and 720p resolution signals or S-Video and
Composite Video* outputs on BNC connectors.
* Optional SD cable sold separately
Distance Adjustments
Because WallVIEW CCU uses active electronics,
there are four cable length adjustments (<100’,
200’, 300’ 400’+), which equalize the length of
the Cat. 5 twisted pairs and vastly improves the
HD video performance.
Figure 1:
(top) Quick-Connect CCU 1 RU rack mount
interface; (bottom) WallVIEW Universal PRO HD1 System
with Camera, EZIM and Wall Mount