VADDIO WallView PRO H900 Installation And User Manual

Manual is about: 3-CMOS HD pan/tilt/zoom robotic camera

Summary of WallView PRO H900

  • Page 1

    © 2013 vaddio - all rights reserved. Prices and specifications are subject to change without prior notice. Document number 342-0506 rev a vaddio™ wallview™ pro h900 featuring the quick-connect pro, ezim and sony® brc-h900 part numbers: 999-6895-000: wallview pro h900 system with the sony brc-h900 (c...

  • Page 2

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 2 of 16 inside front cover - blank.

  • Page 3

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 3 of 16 contents overview: .................................................................................................................................................................

  • Page 4

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 4 of 16 overview: vaddio wallview pro brc-h900 is built and adapted for use with the sony brc-h900 3-cmos hd pan/tilt/zoom robotic camera. This system was designed for an easier cable e...

  • Page 5

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 5 of 16 information: for rs-232 control information, please see the full-length technical manual for the brc-h900. This manual can be found either on the sony or the vaddio website. Unp...

  • Page 6

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 6 of 16 anatomy of the quick-connect pro system interface image: quick-connect pro front panel indicator (left to right) power light: illuminates when the power supply is plugged in the...

  • Page 7

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 7 of 16 image: ezim top panel (left to right) and iso view of ezim (about the size of a deck of cards) power rj-45: the ezim ccu receives 36 vdc on one cat-5 cable (all 4-pair) from the...

  • Page 8

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 8 of 16 step by step mounting instructions: step 1: after determining the optimum location of the camera system, mark the locations for the four screw holes and cable pass-thru (vertica...

  • Page 9

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 9 of 16 step 3: take the wall mount, with the ezim and break out cable installed, and place it against the drywall anchors or 3-gang wall box, making sure to pull the three cat-5 cables...

  • Page 10

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 10 of 16 completing the installation: connect the vaddio 36 vdc power supply to the dc plug on the back of the quick-connect and the ac side to an ac outlet. Power will travel down the ...

  • Page 11

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 11 of 16 fcc, ices-003 compliance and ce declaration of conformity quick-connect pro series interface and ezim products fcc part 15 compliance this equipment has been tested and found t...

  • Page 12

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 12 of 16 warranty information: (see vaddio warranty, service and return policies posted on vaddio.Com for complete details): hardware* warranty: two (2) year limited warranty on all par...

  • Page 13

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 13 of 16 appendix 1: cable pin-outs for the wallview pro systems ezcamera interface module pin-outs power connector pin signal 1 power + 2 power - 3 power + 4 power - 5 power + 6 power ...

  • Page 14

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 14 of 16 ezcamera interface module pin-outs (continued) db-25 connector pins signal 1 gnd out 14 rxd out 2 txd out 15 dtr out 3 dsr out 16 gnd in 4 txd in 17 rxd in 5 dtr in 18 dsr in 6...

  • Page 15

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 15 of 16 inside back cover - blank.

  • Page 16

    Quick-connect pro for the brc-h900 camera © 2013 vaddio - all rights reserved. Document number 342-0506 rev a page 16 of 16 toll free: 800-572-2011 ▪ phone: 763-971-4400 ▪ fax: 763-971-4464 www.Vaddio.Com ©2013 vaddio - all rights reserved. Reproduction in whole or in part without written permission...