VADDIO ZOOMSHOT 20 User Manual - page 3
ZoomSHOT 20 QDVI Camera System
ZoomSHOT 20 QDVI System - Document Number 342-0966 Rev A
Page 3 of 20
O
VERVIEW
:
The Vaddio ZoomSHOT 20 QUSB camera system produces amazing
results for small, medium and large room applications. Anywhere that
a Point-of-View or stationary camera can be used alone or in
conjunction with a Vaddio PTZ camera, to simplify camera coverage
and preset positioning, the ZoomSHOT 20 is the answer.
Essentially, the ZoomSHOT 20 camera is a low cost pan/tilt/zoom
camera, where the pan and tilt are adjusted manually. However,
unlike fixed-lens stationary cameras, the ZoomSHOT 20 is equipped
with a 20X optical power zoom lens that produces a horizontal field of
view ranging from 63º on the wide end to 3.47º on the tele end in a HD
16:9 format.
ZoomSHOT 20 was designed from the ground up and uses the Vaddio
EZCamera™ Cat-5 wiring standard for video, power and control. The
ZoomSHOT 20 supports a wide range of HD video resolutions that are
selectable on the rear panel up to the native 1080p/60 resolution. This
camera can deliver HD video signals, power and control up to 150’
(45.72m) on Cat-5 cable.
This system features the Quick-Connect DVI/HDMI-SR Interface,
which uses the Vaddio EZCamera™ Cat-5 Cable System to transport
HSDS™ (differential video), power and control to and from the camera
over Cat-5 cables. The EZ-POWER VIDEO jack, color coded orange,
carries power to the camera and returns differential HD video over the
same Cat-5/5e/6 cable. The video output of the Quick-Connect
DVI/HDMI-SR is clean and simultaneous HDMI or DVI-D and YPbPr
analog component. The RS-232 jack, color coded blue, provides bi-
directional control and IR Forwarding to and from the camera.
Choose between three (3) IR frequencies for the Vaddio IR SHOT
Commander to allow multiple cameras to be locally IR controlled with
a single remote control. And like all Vaddio camera packages, the thin
profile wall mount is included.
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and tested
for use indoors with the power supply provided. Outdoor operation or use of a different power supply has not been
tested and could damage the device and/or create a potentially unsafe operating condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.
In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,
do not immerse in water or other liquids and avoid extremely humid conditions.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com
free of charge.
Use only the power supply provided with the system. Use of any unauthorized power
supply will void any and all warranties.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not work well for
professional installations and can be the cause of intermittent connections which can result in the RS-232
control line failing and locking up, and/or compromising the HSDS (high speed differential) signals. For best
results please use standard RJ-45 connectors and test all cables for proper pin-outs prior to connection to
Vaddio product.