VADDIO ZoomShot 999-6920-000 Installation And User Manual - page 4
ZoomSHOT 20 for AV Bridge MATRIX PRO
ZoomSHOT 20 System for AV Bridge MARTIX PRO, Document Number 342-0962 Rev A
Page 4 of 18
O
VERVIEW
:
The Vaddio ZoomSHOT 20 camera system produces amazing results
for small, medium and large room applications. Anywhere that a
Point-of-View or stationary camera can be used alone or in
conjunction with a Vaddio PTZ camera, to simplify camera coverage
and preset positioning, the ZoomSHOT 20 is the answer. This
ZoomSHOT 20 system is specifically packaged for use with the AV
Bridge MATRIX PRO and takes advantage of the three (3) built-in
Quick-Connect systems with in the MATRIX PRO.
Essentially, the ZoomSHOT 20 camera is a low cost pan/tilt/zoom
camera, where the pan and tilt are adjusted manually. However,
unlike fixed-lens stationary cameras, the ZoomSHOT 20 is equipped
with a 20X optical power zoom lens that produces a horizontal field of
view ranging from 63º on the wide end to 3.47º on the tele end in a HD
16:9 format.
ZoomSHOT 20 was designed from the ground up and uses the Vaddio
EZCamera™ Cat-5 wiring standard for video, power and control. The
ZoomSHOT 20 supports a wide range of HD video resolutions that are
selectable on the rear panel up to the native 1080p/60 resolution. This
camera can deliver HD video signals, power and control up to 150’
(45.72m) on Cat-5/5e/6 cable.
The EZ-POWER VIDEO jack, color coded orange, carries power from
the MATRIX PRO to the camera and returns HSDS™ (high speed
differential) HD video over the same Cat-5 cable. The RS-232 jack,
color coded blue, provides bi-directional control to and from the
camera.
Intended Use:
Before operating the device, please read
the entire manual thoroughly. The
system was designed, built and tested for
use indoors with the power supply
provided. Outdoor operation or use of a
different power supply has not been
tested and could damage the device
and/or create a potentially unsafe
operating condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.
In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,
do not immerse in water or other liquids and avoid extremely humid conditions.
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com
free of charge.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermittent connections which
can result in the RS-232 control line failing and locking up, and/or compromising the HSDS (high
speed differential) signals. For best results please use real RJ-45 connectors with real RJ-45
crimpers and test all cables for proper pin-outs prior to connection to Vaddio product.