1. DL manuals
  2. Vaillant
  3. Thermostat
  4. multiMATIC VRC 700/5
  5. Operating Instructions Manual

Vaillant multiMATIC VRC 700/5 Operating Instructions Manual

Summary of multiMATIC VRC 700/5

  • Page 1

    Operating instructions multimatic vrc 700/5 be (fr), ch (fr), fr publisher/manufacturer vaillant gmbh berghauser str. 40 d-42859 remscheid tel. +49 21 91 18‑0 fax +49 21 91 18‑2810 info@vaillant.De www.Vaillant.De.

  • Page 2

    Contents 2 operating instructions multimatic 0020255037_00 contents 1 safety .................................................................... 3 1.1 action-related warnings ......................................... 3 1.2 intended use .......................................................... 3 1....

  • Page 3

    Safety 1 0020255037_00 multimatic operating instructions 3 1 safety 1.1 action-related warnings classification of action-related warnings the action-related warnings are classified in accordance with the severity of the possible danger using the following warning signs and signal words: warning symb...

  • Page 4

    1 safety 4 operating instructions multimatic 0020255037_00 contain substances that are hazardous to human health and the environment. ▶ in this case, dispose of the batteries at a collection point for batteries..

  • Page 5

    Notes on the documentation 2 0020255037_00 multimatic operating instructions 5 2 notes on the documentation 2.1 observing other applicable documents ▶ you must observe all operating instructions enclosed with the system components. 2.2 storing documents ▶ keep this manual and all other applicable do...

  • Page 6

    4 operation 6 operating instructions multimatic 0020255037_00 3.2.4 hot water generation a temperature sensor measures the temperature of the wa- ter in the domestic hot water cylinder and forwards the val- ues to the control. At a low domestic hot water temperature, the control increases the temper...

  • Page 7

    Operation 4 0020255037_00 multimatic operating instructions 7 4.1.3 selection level menu information desired temperatures timer programmes back select 1 4 3 2 1 scroll bar 2 current functions of the selection buttons 3 selection level list entries 4 current function or selection level the scroll bar...

  • Page 8

    4 operation 8 operating instructions multimatic 0020255037_00 4.2.3.2 basic display for the cooling operating mode mode time periods symbol desired setting auto on desired cooling temp. Off empty line day desired cooling temp. Off empty line 4.2.3.3 basic display for the ventilation operating mode m...

  • Page 9

    Operation 4 0020255037_00 multimatic operating instructions 9 4.3.1.4 changing the desired setting in the manual cooling advanced function mode time periods effect activated on direct permanent change to the day temp. Cooling off none 4.3.1.5 using the rotary knob to make settings with no effect you...

  • Page 10

    5 operating and display functions 10 operating instructions multimatic 0020255037_00 display display contrast button lock 12 cancel ok 9. Press the right-hand selection button ok to confirm the change. ◁ the controller has saved the changed value. 10. Press the left-hand selection button back repeat...

  • Page 11

    Operating and display functions 5 0020255037_00 multimatic operating instructions 11 5.1.1.2 zone1 menu → information → system status → day temp. Heat- ing – you can use this function to set the desired day temper- ature for the zone. Day temp. Heating is the temperature that you want to have in the...

  • Page 12

    5 operating and display functions 12 operating instructions multimatic 0020255037_00 – you can use this function to read the total fuel consump- tion in kwh for hot water since start-up. 5.1.2.2 diagram: reading the solar yield menu → information → solar yield – the diagram under solar yield shows a...

  • Page 13

    Operating and display functions 5 0020255037_00 multimatic operating instructions 13 ventilation level ensures the exchange of air that you want to have in the rooms at night or when you are not at home. The operating instructions for the ventilation unit explain how the ventilation unit works with ...

  • Page 14

    5 operating and display functions 14 operating instructions multimatic 0020255037_00 5.2.3.7 setting the cooling time programme menu → time programmes → zone1: cooling – the time programmes are only effective in the cooling mode and the manual cooling advanced function. In each set time period, the ...

  • Page 15

    Operating and display functions 5 0020255037_00 multimatic operating instructions 15 5.2.7.1 setting the date menu → basic settings → date/time → date – select this function to set the current date. All controller functions that contain a date relate to the set date. 5.2.7.2 setting the time menu → ...

  • Page 16

    5 operating and display functions 16 operating instructions multimatic 0020255037_00 5.2.15 changing a zone name menu → basic settings → enter zone name – you can now modify the factory-specified zone names as you wish. The name is limited to 10 characters. 5.2.16 activating heat recovery menu → bas...

  • Page 17

    Operating and display functions 5 0020255037_00 multimatic operating instructions 17 day: the operating mode brings the zone to the desired temperature set for day temp. Cooling, regardless of the time periods that you have set in the time programme. 5.3.3 setting the ventilation operating mode the ...

  • Page 18

    6 troubleshooting 18 operating instructions multimatic 0020255037_00 5.4.4 ventilation boost op. Mode → ventilation boost menu → basic settings → operating mode → zone1 → ventilation boost – if you want to switch off the zone while the living areas are being ventilated, activate the ventilation boos...

  • Page 19

    Care 7 0020255037_00 multimatic operating instructions 19 the auxiliary heater is not as efficient as the heat pump, meaning that using only the auxiliary heater to generate heat is expensive. If you want to implement settings on the controller, click back and the basic display appears on the displa...

  • Page 20

    10 technical data 20 operating instructions multimatic 0020255037_00 que leur mise en service et leur entretien le cas échéant, soi- ent réalisés par des professionnels qualifiés. En tout état de cause, ces opérations doivent être réalisées en conformité avec les règles de l'art, les normes en vigue...

  • Page 21

    Appendix 0020255037_00 multimatic operating instructions 21 appendix a overview of the operating and display functions note the functions and operating modes listed are not available for all system configurations. A.1 operating modes operating mode setting default setting operating mode heating off,...

  • Page 22

    Appendix 22 operating instructions multimatic 0020255037_00 setting level values unit increment, select default setting min. Max. Air quality sensor 2 current value ppm exhaust air humidity current value %rel information → consumption → current month → heating ---- electricity total value for the cu...

  • Page 23

    Appendix 0020255037_00 multimatic operating instructions 23 setting level values unit increment, select default setting min. Max. Information → heat recovery → bar chart previous year to cur- rent year comparison kwh/month information → contact details → installer phone number current values informa...

  • Page 24

    Appendix 24 operating instructions multimatic 0020255037_00 setting level values unit increment, select default setting min. Max. Period 1: start – end period 2: start – end period 3: start – end 00:00 24:00 h:min 00:10 mo - su: 11:00- 13:00 days away from home scheduling → start 01.01.01 31.12.99 d...

  • Page 25

    Appendix 0020255037_00 multimatic operating instructions 25 setting level values unit increment, select default setting min. Max. Basic settings → max. Room air humidity → max. Room air hum. 30 70 %rel 1 40 basic settings → default setting → time programmes yes, no no everything yes, no no installer...

  • Page 26

    Appendix 26 operating instructions multimatic 0020255037_00 # message description maintenance work interval 3 service ventila- tion unit the ventilation unit requires maintenance work. Refer to the operating instruc- tions of the ventilation unit for information on the maintenance work required see ...

  • Page 27

    Index 0020255037_00 multimatic operating instructions 27 index 1 1 day at home .................................................................... 17 1 day away from home...................................................... 17 a activating button lock .................................................

  • Page 28

    Index 28 operating instructions multimatic 0020255037_00 t time period, deviating times in the block ............................ 13 time programme quick setting................................................................... 13 setting................................................................

  • Page 32

    0020255037_00 30.06.2017 supplier vaillant group france "le technipole" 8, avenue pablo picasso f-94132 fontenay-sous-bois cedex téléphone 01 49741111 fax 01 48768932 assistance technique 08 26 270303 (0,15 eur ttc/min) ligne particuliers 09 74757475 (0,022 eur ttc/min + 0,09 eur ttc de mise en rela...