Vaillant VIH R 120/6 B Instructions For Use Manual - 1 Safety
1 Safety
4
Instructions for use uniSTOR 0020160984_01
Power transmitted
Continuous
output ***
[kW]
Minimum *
[kW]
Maximum **
[kW]
* 85 °C flow temperature, 60 °C cylinder tem-
perature
** 85 °C flow temperature, 10 °C cylinder tem-
perature
*** 80 °C heating flow temperature, 45 °C hot
water outlet temperature, 10 °C cold water inlet
temperature
To control the hot water generation, weather-
compensated controls and control systems
from suitable boilers can be used. These are
boilers that provide cylinder charging and
make use of the compatibility for a temper-
ature sensor.
Intended use includes the following:
– observance of the operating instructions
included for the product and any other sys-
tem components
– compliance with all inspection and main-
tenance conditions listed in the instruc-
tions.
The use of the product in vehicles, such as
mobile homes and caravans, is not classed
as intended use. Units that are not classed as
vehicles are those that are installed in a fixed
and permanent location (known as "fixed in-
stallation").
Any other use that is not specified in these
instructions, or use beyond that specified in
this document shall be considered improper
use. Any direct commercial or industrial use is
also deemed to be improper.
Caution.
Improper use of any kind is prohibited.
1.3
General safety information
1.3.1 Installation by competent persons
only
The installation and start-up, inspection and
maintenance, and repair and decommission-