Valco Baby car seat adaptor Reference Manual

Page of 8

Download

Print this page

Bookmark us

Thank you for purchasing a quality VALCO product. Please read and follow the instructions outlined in this

guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all

the warnings and safety guidelines before use.

Retain this guide in a safe place for future reference.

PRODUCT REFERENCE GUIDE

graco/peg perego/britax car seat adaptor

Due to our policy of continuous product

development, this product is constantly

evolving. It is possible that some features

or procedures outlined here have changed

since this document was written. If you are

unsure of any procedure shown here, please

or Canada customers can email canada@

valcobaby.com to obtain the most up to date

information before use. Include the batch

number, which can be found on a sticker on

the frame.

All pictures and diagrams herein are provided

for illustration purposes only. Actual product,

color or fabric may vary. VALCO reserves the

right to modify or alter any specification or

color without notice or obligation to modify

any product previously purchased

FURTHER INFORMATION

In North America only

www.valcobaby.com

1800 610 7850

In Canada only

416 488 1900

1 2 3 4 5 6 7 Next › »

Summary of car seat adaptor

Page 1
Thank you for purchasing a quality valco product. Please read and follow the instructions outlined in this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all the warnings and safety guidelines before use. Retain this guide in a safe place...
Page 2
For use with graco single/twin car seat adaptor: if you haven’t already done so, remove the front bar or plugs from the nylon housings on either side of the stroller frame by pressing each inner ‘release button’ and lifting the front bar or plug from the housing. Insert the car seat adaptor connecti...
Page 3
Position the car seat so that the infant is facing the handlebar of the stroller. Line up the car seat to the adaptor frame ensuring that the car seat latch (red lever on back of car seat) rests under the adaptor frame. Once the car seat is in position, take the second set of tether straps and place...
Page 4
To secure twin car seat adaptor: replace step c in single adaptor instructions with the following two steps c-1 and c-2: located on the car ceat adaptor support frame are two sets of tether straps. The first set (as shown in figure c-1- 1 )rest on the foot rest of the stroller. To secure these strap...
Page 5
B insert the adaptor insert the car seat c b c insert the car seat adaptor connecting pieces into the nylon housings. Be sure that the bar release button is securely in the housing. Position the car seat so the infant is facing the handlebar of the stroller. There are three bars on the adaptor frame...
Page 6
A b insert car seat adaptor remove bumper bar or housing bumper bar nylon plug press to remove the car seat: detach the straps (reversing the process outlined in d) and lift up the car seat to unlock it from the frame. To remove the car seat adaptor: locate the two nylon release buttons that sit bel...
Page 7
C c secure the car seat remove adaptor position the car seat so that infant is facing the handlebar of the stroller. Line up the car seat to the adaptor frame ensuring that the car seat latch has clicked on the adaptor frame. Once the car seat is in position, thread the tether straps through the sid...
Page 8
Warnings your child’s safety is your responsibility ……… check all parts for breakage or fatigue before use. Discontinue immediately • if any part is found to be damaged or broken. Do not use this car seat adaptor until you have read and understood all of • the instructions. Warning: • please be awar...