1. DL manuals
  2. Valco Baby
  3. Baby Accessories
  4. ION STROLLER
  5. Product Reference Manual

Valco Baby ION STROLLER Product Reference Manual

Summary of ION STROLLER

  • Page 1

    Thank you for purchasing a quality valco baby product. Please read and follow the instructions outlined in this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all the warnings and safety guidelines before use. Important: please read the f...

  • Page 2

    Ion remove the stroller from the carton and dispose of all packaging thoughtfully. Figure a 1. Lift your stroller handle upward. You will feel the stroller chassis opening. Figure b 2. Continue unfolding the chassis until you hear the chassis click open in the locked position. Inserting rear axle fi...

  • Page 3

    Inserting rear wheels figure e 1. Simultaneously press on the spring loaded axle button and insert it through the central hub of the rear wheel. Repeat this process for the other rear wheel. Figure f 2. Pressing the axle button again, insert the axle end into the side of the brake housing as far as ...

  • Page 4

    Securing the front wheels figure h 1. Your front wheels can be set to swivel freely (360º) or can be fixed in place for use over rough or sandy surfaces. 2. To fix the front wheel in the non swivel position, turn the wheel so that the two notches on both housings line up. Press down firmly on the sw...

  • Page 5

    Tether strap figure k 1. Your stroller has been equipped with a safety tether strap. This strap has been designed to always keep your stroller within constant reach. Note: the tether strap doubles as your locking strap (figure o). Important: always slip the loop in the strap securely over your wrist...

  • Page 6

    N o p inserting rear axle figure n 4. Continue to fold the frame forward. Make sure that the lock strap is threaded through handlebars figure o 6. To lock the frame, the keyhole of the lock strap should be engaged over the locking pin found on the frame chassis behind the front wheel. Click securely...

  • Page 7

    Using your harness figure q to secure your child in the harness. 1. Overlap buckles so that they fit together to form one complete buckle. Figure r and q 1. Insert the completed buckle into the buckle housing until it engages securely in place. 2. Carefully adjust the harness straps to snugly fit yo...

  • Page 8

    Warning • follow the manufacturer’s instructions. • put on all the brakes whenever you park the pram/stroller. • do not leave children unattended. • do not carry extra children or bags on this pram/stroller. • make sure children are clear of any moving parts if you adjust the pram/stroller. Otherwis...