DL manuals
Valco Baby
Stroller
ION
Product Reference Manual

Valco Baby ION Product Reference Manual

Other manuals for ION: Product Reference Manual

Page of 8

Download

Print this page

Bookmark us

Thank you for purchasing a quality VALCO BABY product. Please read and follow the instructions outlined in

this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand

all the warnings and safety guidelines before use.

Important: Please read the following instructions carefully before assembling this product. Retain this

guide in a safe place for future reference.

PRODUCT REFERENCE GUIDE

STROLLER

Due to our policy of continuous

product development, this product

is constantly evolving. It is possible

that some features or procedures

outlined here have changed since

this document was written. If you are

unsure of any procedure shown here,

please contact us via the web at

info@valco.com.au

to obtain the most

up to date information before use.

Include the batch number, which can

be found on a sticker on the frame.

All pictures and diagrams herein are

provided for illustration purposes only.

Actual product, colour or fabric may

vary. VALCO BABY reserves the right

to modify or alter any specification

or colour without notice or obligation

to modify any product previously

purchased

ION

VE 2012

vs100412

FURTHER INFORMATION:

www.valco.com.au

Find us on:

1 2 3 4 5 6 7 Next › »

Summary of ION

Page 1
Thank you for purchasing a quality valco baby product. Please read and follow the instructions outlined in this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all the warnings and safety guidelines before use. Important: please read the f...
Page 2
Opening remove the stroller from the carton and dispose of all packaging thoughtfully. Figure a 1. Lift your stroller handle upward. You will feel the stroller chassis opening. Figure b 2. Continue unfolding the chassis until you hear the chassis click open in the locked position. Inserting rear axl...
Page 3
Inserting rear wheels figure e 1. Simultaneously press on the spring loaded axle button and insert it through the central hub of the rear wheel. Repeat this process for the other rear wheel. Figure f 2. Pressing the axle button again, insert the axle end into the side of the brake housing as far as ...
Page 4
Securing the front wheels figure h 1. Your front wheels can be set to swivel freely (360º) or can be fixed in place for use over rough or sandy surfaces. 2. To fix the front wheel in the non swivel position, turn the wheel so that the two notches on both housings line up. Press down firmly on the sw...
Page 5
Tether strap figure l 1. Your stroller has been equipped with a safety tether strap. This strap has been designed to always keep your stroller within constant reach. Note: the tether strap doubles as your locking strap (figure o). Important: always slip the loop in the strap securely over your wrist...
Page 6
O p inserting rear axle figure o 5. Continue to fold the frame forward. Make sure that the lock strap is threaded through handlebars figure p 6. To lock the frame, the keyhole of the lock strap should be engaged over the locking pin found on the frame chassis behind the front wheel. Click securely i...
Page 7
Using your harness figure r your stroller harness is specifically designed with many built in safety features. This includes the requirement that, when opened, all straps are released so that no dangerous loops can be formed causing a strangulation hazard. Warning: your child must always be harnesse...
Page 8
Further information: www.Valcobaby.Com.Au find us on: warning: to avoid injury or death • always apply the brakes whenever the pram/stroller is stationary • do not leave children unattended. • do not carry extra children or bags on this pram/stroller. • make sure children are clear of any moving par...