Valco Baby TRIMODE Product Reference Manual

Summary of TRIMODE

  • Page 1

    Thank you for purchasing a quality valco baby product. Please read and follow the instructions outlined in this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand all the warnings and safety guidelines before use. Important: please read the f...

  • Page 2

    Opening the stroller chassis figure a 1. Lay the stroller flat on the floor and carefully cut the cable tie which holds the frame. To unfold the chassis, locate the rear legs. Note: the rear centre leg is highlighted in red. 2. Holding the rear centre leg, lift the stroller upwards. Pull the centre ...

  • Page 3

    Figure e 7. Press the axle button and insert the protruding long axle into the opening on the stroller frame beneath the brake. Release the axle button when wheel is in place to secure. Note: ensure that the brake pedal is fully retracted, so that the brake pin (highlighted in red) does not obstruct...

  • Page 4

    Installing the expanda hoods figure h 18. Identify left and right side hoods by determining that the sliding housing (image k) sits on the side (a) of the frame, and the puzzle housing (b) (image j) rests on the centre (c) of the stroller. Figure i turn your stroller around to the back: 19. Place th...

  • Page 5

    Using the expanda hood figure m the expanda hood unzips, increasing the size of your standard hood, to give greater coverage and protection from the sun and weather for your child. To open the expanda hood: 26. Locate the zip in the center of the expanda hood and unzip completely 27. Gently pull the...

  • Page 6

    Using your brakes figure q 36. To engage: press down on the centre pedal until the brake pins engage in the nylon brake cogs in the wheel hub. Important: always check that the brake has engaged before use, if not you may need to move the stroller forward or back slightly until it locks into place. 3...

  • Page 7

    Using the harness your child must always be harnessed while in the stroller. Figure u to open your harness: 49. Push down on both buckle prongs and hold. 50. Simultaneously press the release button in the centre of the buckle. 51. Lift the buckles from the buckle housing. This process may be difficu...

  • Page 8

    In australia/new zealand www.Valco.Com.Au www.Valco.Co.Nz in north america only www.Valcobaby.Com 1 800 610 7850 warning • follow the manufacturer’s instructions. • put on all the brakes whenever you park the pram/stroller. • do not leave children unattended. • do not carry extra children or bags on...