1. DL manuals
  2. Valcom
  3. Software
  4. 3CX
  5. Configuration Manual

Valcom 3CX Configuration Manual

Summary of 3CX

  • Page 1

    3cx sip configuration guide page 1 of 5 valcom session initiation protocol (sip) vip devices are compatible with 3cx sip phone systems. The valcom device is added to the 3cx as a standard sip extension (generic sip phone). The following steps outline the typical configuration process: 1. Navigate yo...

  • Page 2

    3cx sip configuration guide page 2 of 5 4. Enter the appropriate valu es for the “add extension” page fields. In this example, our user wil l be “9993” and this user’s password will be “password”. Required fields: extension number, id, & password optional fields are used to make administration tasks...

  • Page 3

    3cx sip configuration guide page 3 of 5 5. Change the “sip id” field to the sip extension given to the valcom sip enabled vip device. In this example, we will fill in “9993” for the sip id, the same as our “extension number” field on the “general” tab. Select “ok”, at the bottom of the page, to appl...

  • Page 4

    3cx sip configuration guide page 4 of 5 7. Open the vip-102b tool interface for the valcom sip enabled vip device. Note: the information contained in this guide is limited to configuration of the “sip” tab in the vip-102b ip solutions setup tool for the valcom vip device that is to be registered to ...

  • Page 5

    3cx sip configuration guide page 5 of 5 8. After updating your vip device, you will be prompted to reset your device. Select “yes”. 9. Back to our 3cx web interface, select “extension status” from the toolbar. 10. After getting the vip device assigned the proper information, updated and reset, you w...