Valcom ONE-WAY PAGING SYSTEM Design/information

Issue 15 

1 

947100 

VALCOM ONE-WAY PAGING 

SYSTEM DESIGN/INFORMATION 

GENERAL 

These instructions provide the basic information 

required to properly install a One-Way paging 

system manufactured by Valcom, Inc.  Valcom 

One-Way Paging Equipment may be used with 

any 1A2, Electronic Key, PABX Telephone 

Systems, or with one or more dedicated single 

line telephone sets. 

SYSTEM OVERVIEW 

Purpose 

Provides telephone accessed single or multizone 

paging. 

Applications 

  Electronic Key Systems 

 PABX 

  Stand alone systems 

 1A2 

 VALCOM 

ONE-WAY 

CONTROL 

    UNIT 

 ONE-W AY 

 SPEAKER 

ASSEMBLY

POWER 

SUPPLY 

TELEPHONE 

   SYSTEM 

ONE-WAY PAGING SYSTEM BLOCK DIAGR AM

FIGURE 1 

Features 

  1, 3, 6, 9, and 24 (expandable with V-2925A 

in 24 zone increments for up to 96) zone page 

control units available. 

  One-way all call to all speakers available. 

  Volume controls and amplifiers in each 

speaker. 

  No high power amplifier required. 

  Standard CAT 3, 5, 5E twisted pair cable 

(typically 22 or 24 AWG) is used for speakers. 

  Existing twisted pair house cables / feed 

cables may be used without introducing 

crosstalk. 

  See Multi-Path Information for systems up to 

360 zones. 

Access Methods 

  Electronic Key System line button (C. O. 

circuit required). 

  PABX loop trunk port (trunk circuit required). 

  Page port (some with N.O. CC). 

  Station level access available (with 

appropriate adapter). 

  Stand alone with dedicated single line sets. 

  1A2 line button (line card required on most 

units). 

Capacity 

  All units are one talkpath and one link. 

  V-1094A, 1 zone (page port access only). 

  V-2000A, 1 zone with an integrated power 

supply, background music input. 

  V-2001A, 1 zone with an integrated power 

supply, background music capabilities and 

override capabilities, and featuring two 

integrated tone generators for night ringing 

and time clock tones. 

  V-2003A, 3 zones with all call, background 

music capabilities, override capabilities, two 

integrated tones for night ringing and time 

clock signaling plus integrated power supply. 

  V-2006A, 6 zones with all call, up to 3 group 

calls, override capabilities, background music 

capabilities, two integrated tone generators 

for night ringing and time clock tones plus 

integrated power supply. 

  V-2924A, 24 zones with all call, background 

music capabilities. 

  V-9937, 1 zone, page port access. 

  V-1109RTVA, 9 zones with all call, 

background music capabilities (no station or 

page port access). 

Each of the units listed above will drive up to 40 

Valcom one-way amplified speaker assemblies 

per zone (150 on V-1094A, V-9937, V-2000A, 

V-2001A, V-2003A and V-2006A).  Additional 

speakers may be added to a zone by using a 

V-1094A.  Each V-1094A allows the addition of 

150 more amplified speaker assemblies to that 

zone.