Valcom V-1030M Manual

Summary of V-1030M

  • Page 1

    Vsp-v-1030m/1036m/1048m issue 6 1 947032 marine horns v-1030m - 5 watt paging horn amplifier assembly v-1036m - 15 watt paging horn amplifier assembly v-1048m - 45 ohm talkback horn introduction this instruction contains the specifications and information necessary to install, operate and maintain t...

  • Page 2

    2 applications of the v-1030m and v-1036m • use with valcom page control • expanding the capability of telephone systems which contain limited paging capabilities • loud ringer application in systems where loud-speaker tone signaling is employed. V-1030m - nominal specifications input impedance: 600...

  • Page 3

    3 consult your valcom distributor for assistance in selecting a control unit and power supply. Nominal specifications for the v-1048m • input impedance: 45 ohm limitations of the v-1048m • two talkback speakers maximum per zone. • 800 feet maximum cable length to speaker note: do not split pairs to ...

  • Page 4

    4 technical assistance when trouble is reported, verify the unit is properly connected and there are no broken connections leading to this unit. Ascertain volume control is turned up. Assistance in troubleshooting is available from the factory. When calling, you should have a vom and a test set and ...

  • Page 5

    5 valcom limited warranty valcom, inc. Warrants its products to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. The obligation under this warranty shall be limited to the replacement, repair or refund of...