Valcom V-9020 Product Manual

VSP-V-9020 

Issue 6 

1 

947911 

V-9020 – CEILING SPEAKER 

INTRODUCTION 

The V-9020 Ceiling Speaker is designed to easily 

install into standard T-Bar suspended ceilings by 

replacing 1/2 of a 2' x 2' ceiling tile (or 1/4 of a 2' x 4' 

tile).  The 1' x 2' perforated grille provides increased 

sound dispersion over conventional round speaker 

grilles and blends into the ceiling by providing the 

appearance of a standard air return.  

The speaker assembly features a perforated steel 

grille, finished with a durable white epoxy powder 

paint and an 8" full-range speaker.  The V-9020 is 

provided with a single input 1 Watt amplifier and 

operates on 24VDC.  A 24" T-Bar is included to cover 

the area where the speaker assembly and ceiling tile 

meet. 

SPECIFICATIONS 

Features

• 

Perforated steel grille with white epoxy paint 

• 

8" (20.32cm) speaker 

Dimensions / Weight 

Dimensions: 

23.75" L x 11.82" W x 3.40" D 

(60.33cm L x 30.02cm W x 8.64cm D) 

Weight: 

6.5 lbs. (2.95) Kg.

Technical Specifications

Power Rating:  

1Watt Continuous 

Operating Voltage / Current: 

24VDC, 50mA  

SPL at 1 Meter with 1 Watt Input: 

97dB 

Environment

Temperature: 

0 to 50 Deg. C (32 to 122  Deg. F) 

Humidity: 

0 to 85% non-precipitating 

Coverage 

The area covered by the V-9020 Ceiling Speaker is 

determined by the height of the ceiling.  If the ceiling 

height is 8 feet, the speaker will cover 250 sq. ft.  With 

a ceiling height of 9 to 15 feet, the speaker will cover 

400 sq. ft.  If the ceiling is 16 to 25 feet high, the 

speaker will cover 850 sq. ft. 

CONNECTIONS 

MOUNTING

When mounting in a 2' x 2' tile ceiling, cut ceiling tile 

in half (When mounting in a 2' x 4' tile, remove 1/4 of 

the tile).  Make connections and place speaker on 

ceiling grid.  Slide T-Bar under edge of speaker.  Drop 

remainder of cut tile next to speaker.