Valcom V-9925A User Manual
VSP-V-9925A
Issue 7
1
947925A
V-9925A
LOUD WARBLE RINGER WITH VOLUME CONTROL
5 WATT -24VDC
INTRODUCTION
These instructions contain the specifications and
guidelines necessary to install, operate and maintain
the V-9925A, 5-Watt Loud Warble Ringer with
Volume Control.
SPECIFICATIONS
The V-9925A Loud Warble Ringer is a self-contained
5-Watt electronic ringer which can be used for either
interior or exterior signaling applications. The unit is
designed to allow a loud warble to be broadcast as
long as input signal is present. The input signal
should be interrupted or controlled by the ringing
interval.
Application
•
Loud speaker tone signaling for key systems,
intercoms, PABXs
•
Outside signaling for incoming calls into a key
system
•
Signaling in a noisy environment
Features
•
5 Watt amplifier
•
Volume control
•
High efficiency horn
•
Tone generation circuitry
Coverage
Refer to the following table for speaker coverage.
The first number given is the side to side distance for
mounting the speakers. It is also the distance in front
of the speaker that you can expect to hear a good
quality signal. The second number is the area being
covered in square feet.
Location
Distance
Area
Quiet
220 ft.
48,400 sq. ft.
Moderate
160 ft.
25,600 sq. ft.
Noisy
80 ft.
6,400 sq. ft.
Very Noisy
40 ft.
1,600 sq. ft.
Environmental
•
Temperature:
-20 to +55°C
•
Humidity:
0 to 95% (non-precipitating)
Dimensions/Weight
•
6.50"H x 8.20"W x 10.40"D,
plus mounting base
(16.51cm H x 20.83cm W x 26.42cm D)
•
3.6 lbs. (1.63kg)
Signal/Power Requirements
•
Power Supply: -24VDC, 500mA ("B" Battery)
(10 Valcom power units)
•
Signal Source:
105VAC or 20VAC