Technical manual operation and installation instructions v147-cl2 antenna document no: vtm-04-006a valcom manufacturing group, inc. 175 southgate drive, p.O.Box 603, guelph, ontario, canada n1h 6l3 tel: 519-824-3220 fax: 519-824-3411 web site: www.Valcom-guelph.Com email: enquiries@valcom-guelph.Com.
V147-cl2 vtm-04-006a i revision sheet revision description date user - original issue november 11, 2004 - a amended maintenance section august 2007 j.Soper.
V147-cl2 vtm-04-006a ii table of contents section page 1.0 general information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1....
V147-cl2 vtm-04-006a 1 1.0 general information 1.1 introduction this manual describes the electrical and mechanical properties of the v147-cl2 antenna. It also provides the information necessary to install, operate and maintain the antenna system. 1.2 technical reference data table 1.1 - electrical ...
V147-cl2 vtm-04-006a 2 table 1.2 - mechanical properties of the v147-cl2 antenna mechanical properties 3 th section length 13.0 feet (3.9 meter) loading coil (2 nd ) section length 18.5 feet (5.6 meter) bottom section length 17.5 feet (5.3 meter) typical assembly length (including valcosphere) 49 fe...
V147-cl2 vtm-04-006a 3 2.0 functional description 2.1 general the v147-cl2 is intended to be used as part of an overall communication system which consists of a transmitter (or receiver or transceiver), an antenna coupler and the antenna. It is used around the world in many applications with require...
V147-cl2 vtm-04-006a 4 3.0 maintenance 3.1 scheduled maintenance the antenna is virtually maintenance free. The external finish is an epoxy polyamide two part compound paint. The minimum finish life before showing signs of deterioration should be at least six years under normal climate condition. Wh...
V147-cl2 vtm-04-006a 5 4.0 installation 4.1 unpacking open the shipping crates and remove the antenna sections. Remove all packing material including the male ferrule protectors on the antenna sections. The v147-cl2 antenna as shipped consists of the items listed in table 5.1. Check that all of the ...
V147-cl2 vtm-04-006a 6 gin pole into the pipe attachment and secure. (6) support the second section (item 2, table 5.1) on two other saw horses so that the two sections lie in the same straight line. (7) make sure the threads of the male ferrule on the base section are clear of foreign material and ...
V147-cl2 vtm-04-006a 7 figure 4.1.
V147-cl2 vtm-04-006a 8 5.0 parts list 5.1 general a list of parts shipped with the v147-cl2 antenna appears in table 5.1. Table 5.1 - list of parts for the v147-cl2 antenna item no. Part number description qty notes 1 vd-00-00264 base section 1 2 vd-00-00265 section 2 (coil loaded) 1 3 vd-00-00266 s...
V147-cl2 vtm-04-006a 9 6.0 quick reference data 6.1 general quick reference engineering data for use during planning and installation activities for the v147-cl2 antenna is presented on the following page. C quick reference data - v147-cl2 antenna c foundation details for vhb-17 hinge plate or vtgs-...
V147-cl2 vtm-04-006a 10
V147-cl2 vtm-04-006a 11 figure 6.2.
V147-cl2 vtm-04-006a 12 figure 6.3.
V147-cl2 vtm-04-006a 13 figure 6.4.
V147-cl2 vtm-04-006a 14 figure 6.5.
V147-cl2 vtm-04-006a 15 figure 6.6.
