Valcom VIP-430A Installation Manual

   Issue 

1 

1 947804 

Issue 1 

VIP-430A 

 IP WALL SPEAKER  

INTRODUCTION 

The VIP-430A IP Wall Speaker enables 

handsfree talkback access to a single location 

over an IP-based LAN/WAN.  This allows a 

handsfree talkback extension anywhere on the 

network.  The speaker levels are electrically 

adjusted during setup. The enclosure is made of 

steel with a durable gray powder coated finish.  

The color of the enclosure can easily be changed 

to match any decor.  A detachable black clothe 

grille is included.  A call switch input is provided 

for the remote speaker location signaling. 

Power is provided to the VIP-430A via a Power 

over Ethernet (PoE) switch meeting the 802.3af 

specification.   

DIMENSIONS/WEIGHT 

10.13” H x 12.31” W x 4.63” D 

       (25.73cm x 31.27cm W x 11.75cm D) 

Weight: 4.25 LBS (1.91 kg) 

Environment

Temperature:                                    0 to +40° C 

Humidity:     

           0 to 85% non-precipitating 

Packing List 

Qty. Item 

1 VIP-430A 

1 VSP 

Document 

INSTALLATION 

FCC Information 

This equipment has been tested and found to 

comply with the limits for a Class A digital 

device, pursuant to Part 15 of the FCC Rules.  

These limits are designed to provide 

reasonable protection against harmful 

interference when the equipment is operated 

in a commercial environment.  This 

equipment generates, uses and can radiate 

radio frequency energy and if not installed 

and used in accordance with the instruction 

manual, may cause harmful interference to 

radio communications.  Operation of this 

equipment in a residential area may cause 

harmful interference in which case the user 

will be required to correct the interference at 

his own expense. 

Precautionary Designations

CAUTION:  To reduce the risk of electric shock,

Do not remove cover.

No user serviceable parts inside.

Refer servicing to qualified serv ice personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that dangerous

voltage constituting a risk of electric

shock is present within this unit.

This symbol indicates that there are

important operating and maintenance

instructions in the literature accompanying

this unit.