Valcom VIP-483 User Manual

    1 947349 

CAUTION:  To reduce the risk of electric shock,

Do not remove cover.

No user serviceable parts inside.

Refer servicing to qualified service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that dangerous

voltage constituting a risk of electric

shock is present within this unit.

This symbol indicates that there are

important operating and maintenance

instructions in the literature accompanying

this unit.

Issue 3

VIP-483 

Vandal Resistant IP FlexHorn

INTRODUCTION 

The VIP-483 Vandal Resistant IP FlexHorn 

enables loudspeaker voice paging anywhere on 

an Ethernet network.  The VIP-483 consists of a 

high efficiency Class-D Horn and a Network 

Interface, allowing stand alone capability when 

used with a SIP telephone system or can be 

accessed from a variety of Valcom managed 

VoIP products.   Power is provided to the VIP-483 

via a Power over Ethernet (PoE) switch meeting 

the 802.3af specification. 

SPECIFICATIONS 

Access Methods 

  SIP telephone system 

  PBX, FXO Port w/VIP-811  

  POTS telephone set w/VIP-811 

  PBX, FXS Port w/VIP-821 

  Valcom M Cast Page Group 

Features 

  RJ-45 for network connection 

  Network activity LEDs 

  Power over Ethernet (PoE) 802.3af 

compatible 

  Vandal Resistant stainless steel faceplate 

Dimensions/Weight 

  8.5” H x 11.0" W x 4.25" D  

      (21.6cm H x 27.9cm W x 10.8cm D) 

  Weight:   3.5 lbs.  (1.6 kg) 

Nominal Power Requirements 

Via 802.3af (PoE) Ethernet Switch:Class 3 

Environment

Temperature:                                     0 to +40° C 

Humidity:     

           0 to 85% non-precipitating 

Packing List 

Precautionary Designations 

Qty Item 

1 

VIP-483 IP FlexHorn 

1 VSP 

Document