Valcom VIP-580 User Manual

 1 

947796 

CAUTION:  To reduce the risk of electric shock,

Do not remove cover.

No user serviceable parts inside.

Refer servicing to qualified service personnel.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that dangerous

voltage constituting a risk of electric

shock is present within this unit.

This symbol indicates that there are

important operating and maintenance

instructions in the literature accompanying

this unit.

ISSUE 1

VIP-580 

IP FlexHorn Surface Mount

INTRODUCTION 

The VIP-580 IP FlexHorn Surface Mount unit 

enables loudspeaker voice paging anywhere on 

an Ethernet network.  The VIP-580 consists of a 

high efficiency Class-D Horn and a Network 

interface, allowing stand alone capability when 

used with a SIP telephone system or can be 

accessed from a variety of Valcom managed 

VoIP products.  Power is provided to the VIP-580 

via a Power over Ethernet (PoE) switch meeting 

the 802.3af specification. 

SPECIFICATIONS 

Access Methods 

  SIP telephone system 

  PBX, FXO Port w/VIP-811  

  POTS telephone set w/VIP-811 

  PBX, FXS Port w/VIP-821 

  Valcom M Cast Page Group 

Features 

  RJ-45 for network connection 

  Network activity LEDs 

  Power over Ethernet (PoE) 802.3af 

compatible  

  Paintable grille and enclosure 

Dimensions/Weight 

  10.0” H x 12.2" W x 4.0" D  

      (25.4cm H x 30.9cm W x 10.2cm D) 

  Weight:   7.4 lbs.  (3.4 kg) 

Nominal Specifications 

Input Impedance: 

          600 Ohms 

Input Level: 

              -10dBm 

Output Impedance: 

          600 Ohms 

Output Level: 

 -10dBm nominal 

Nominal Power Requirements 

Via 802.3af (PoE) Ethernet Switch: Class 3 

Environment

Temperature:                                  0 to +40° C 

Humidity:     

        0 to 85% non-precipitating 

Packing List 

Precautionary Designations 

Qty

Item 

1 

VIP-580 IP FlexHorn 

1 VSP 

Document