Valcom VIP-800 User Manual - page 3
3 947051
In this example, the VIP-810 and VIP-800 are connected to the data network as a stand-alone paging system. This
could be installed where network access is
available, but telephone access is not.
In these examples, two VIP-800’s are connected to the data network to extend a paging zone to a remote location.
In this example, the VIP-810 is connected to the data network jack already installed and now the network connected
telephone can reach into the existing Valcom V-2924A to access all call priority paging. This configuration could be
used at a guard shack where network access is available, but telephone system access is not.
VIP-810
Network
LAN
OR
WAN
VIP-800
VIP-800
VIP-800
Network
V-2003A
LAN
OR
WAN
Remote Location
Analog
Phone
VIP-800
V-2924A
Override Audio
Page Input
Network
LAN
OR
WAN
VIP-810
PBX
Loop Start Trunk Port
Stand Alone
Telephone (Pots)
VIP-800
V-2003A
Zone 1 Audio
Zone 1 - Extended Audio
VIP-800
Network
LAN
OR
WAN
Building 1
Building 2