Valcom VIP-801 User Manual
1 947995
ISSUE 6
VIP-801
ENHANCED NETWORK AUDIO PORT
INTRODUCTION
The VIP-801 Enhanced Network Audio Port
enables voice access to a single zone of one-way
paging over an IP network, allowing page zones
to be extended anywhere network connectivity is
available. The VIP-801 can be programmed as a
SIP (Session Initiation Protocol) device for
connectivity to virtually any Voice over IP (VoIP)
telephone system.
SPECIFICATIONS
Features
1 Audio Output or Input
2 Form C Relays
1 Contact Closure Input
1 SIP identity for registering to a VoIP telephone
system
RJ-45 jack for network connection
Front panel activity LED
Provides audio for up to 40 Valcom one-way
amplified speaker assemblies
AUX audio input via RCA jack
Contact closure or VOX operation of audio input
Removable screw terminal connectors provided
for audio and relay interface
AUX input music mutes during page
Output control contact closure provided during
paging output
Compatible with 25 or 70 Volt amplifiers
2.5mm jack for optional DC power
Power over Ethernet (PoE) 802.3af compatible
Dimensions/Weight
1.38 H x 6.13" W x 5.25" D
(3.50cm H x 15.6cm W x 13.33cm D)
Weight: 1.25 lbs. (0.57 kg)
Nominal Specifications
Input Impedance:
600 Ohms
Input Level:
-10dBm nominal
Voice Switch Sensitivity:
-21dBm
AUX Input Impedance:
8 to 600 Ohms
AUX Input Level:
-10dBm nominal
Output Impedance:
50 Ohms
Output Level:
- 10dBm nominal
Relay Current:
1 Amp @ 24VDC
Nominal Power Requirements
Via rear panel barrel connector:
Voltage: 24VDC
Current:
325mA
Via 802.3af PoE Ethernet Switch:
802.3af:
Class
3
Environment
Temperature: 0 to +40° C
Humidity:
0 to 85% non-precipitating
Packing List
Qty Item
1 VIP-801
1 VSP
Document
2
Mounting Brackets W/ Hardware
4 Rubber
Pads