Valcretec UPV-5500 Service Manual - page 3
UP-V5500 Page
4 of 74
3. Installation method
¾
MCR Configuration
1. Overview
2. Setup
3. Start MCR Configuration
4. MCR Configuration Tool
5. MCR information display
6. Detail control
7. Tool Bar
¾
THE METHOD TO CHANGE LANGUAGE(Microsoft POSReady)
¾
POS TERMINAL DRIVER AND UTILITY OVERVIEW
¾
TOUCH SCREEN SET-UP
¾
PCB OVERVIEW
1. System Main B/D
1-1.
System Block Diagram
1-2.
Main B/D Block Diagram
1-3.
Components Layout
1-4.
Connector Pin Assignment
2. LCD unit Sub-Control B/D
2-1.
Block Diagram
2-2.
General Specification
2-3.
Components Layout
2-4.
Connector Pin Assignment
3. Magnetic Card Reader Interface B/D
3-1.
Block Diagram
3-2.
General Specification
3-3.
Components Layout
3-4.
Connector Pin & Software Interface Description
4. LED B/D
4-1.
Block Diagram
4-2.
General Specification
4-3.
Components Layout
4-4.
Connector Pin Assignment
¾
CABLE PIN ASSIGNMENT
¾
EXPLODED DRAWING
y Due to continuous enhancements of the system features and the wide range of products available, the contents of this manual are subject to change without notice.
y The company is not responsible for any damage caused by using products other than in their standard specification, or by not conforming to the instructions and
warnings set forth in this and any other manual.