Valentine VMC-2 Instructions Manual - page 6
Date de création: 11.12.95 par:LIE
Date de modif.: 10.09.03
Fichier DATA WORD IN
Fabrique SA
Doc. No.:
IN-VMCED
Page No.:
6 / 8
4.4 Servicing the Multicooker, cleaning
Apart from thorough cleaning for hygienic reasons, the VMC does not required any mainte-
nance. Avoid letting the unit overflow. Do not splash water on the electrical parts, and clean
the outside with a damp cloth only.
Do not damage the thermostat probe with sharp or pointed tools
Unique advantages of your Valentine Multicooker
:
Pan size GASTRONORM
GN 1/1
⇒
You can use GN pans you already
have
Single-pressed deep pans ⇒ Easy to clean
⇒
Resistant to salt water
Multi-function
⇒
Cook, blanch, poach
⇒
Reheat, defrost
⇒
Boil in the bag, steam, etc.
Adjustable thermostat and
4 position switch
⇒
Always at the right temperature for
sausages, custards, etc.
5. Troubleshooting
5.1 Simple faults
Faults
Probable cause
Solutions
Multicooker does not heat up
∗ No power
◊
Check fuses, plug and socket
carefully
Multicooker does not get hot
enough
∗ One phase missing in power
supply
◊
Check fuses
Clear pilot lamp does not come on
or flashes
∗ Faulty bulb
∗ One phase missing in power
supply
◊
Change bulb
◊
Check fuses
Yellow pilot lamp does not come on
or flashes
∗ Faulty bulb
◊
Change bulb
5.2 Complex faults
Faults
Probable cause
Solutions
Pilot lamps are on but the Multi-
cooker does not heat up
∗ Faulty heating element
◊
Call After-Sales Service *
Multicooker does not get hot
enough
∗ Phase failure
∗ Faulty element
◊
Call After-Sales Service *
Fuses blow on switching on
∗ Short-circuit
◊
Call After-Sales Service *
Clear pilot lamp does not come on
or flashes
∗ Faulty switch
◊
Call After-Sales Service *
Yellow pilot lamp does not come on
or flashes
∗ Faulty thermostat
◊
Call After-Sales Service *
* Important: When calling the After Sales Service, please quote:
- type of Multicooker, serial number, voltage, current and rating
You will find this information on page No 1 of this manual or on the rating plate
You will save time and therefore additional costs.