Valeo beep&park/vision User Manual - User Guide
User Guide
Recomendations for Use
Valeo may not be held responsible for the incorrect installation or misuse of the products.
•
beep&park
®
/vision™ helps drivers in their parking manœuvres but does not replace
drivers’ vigilance..
•
beep&park
®
/vision™ cannot be fitted on vehicles equipped with a tow bar
•
Obstructed sensor may avoid system to function properly. Make sure that the
sensors are clean and not covered with mud, snow or ice.
•
If you wish to adapt the colour of the sensors to the colour of your vehicle, we have
paintable sensors available as spare parts.
•
We recommend you to remove the screen when leaving vehicle unattended to avoid
theft.
•
To maintain good visibility, make sure you keep the camera clean and avoid to place
the camera in contact or close to sharp objects.
•
Heavy rain, untidy camera or faulty sensor may cause image to scramble temporary.
•
If you wish to connect beep&park
®
/vision™ with your Satellite Navigation System,
ask you approved auto technician to check compatibility.
•
Please do not modify or repair the product on your own. It may cause malfunctions
as well as serious damage to the product and vehicle.
•
Make sure to protect the screen and the film from liquid projections while cleaning the
inside of the car. Water may cause damage to electronic circuits and cause electric
shock.
•
Avoid contacts with chemical products and detergents as they may case damages to
the surface as well as internal component of the product.
•
Avoid all mechanical shock that may cause permanent damage to electronic and
electrical components and lead to a functional deteriorations
•
If the system does not beep, check that the volume level is not set at minimum.
•
In case of a accident, spare parts are available through your usual distribution
channel.
4/4
Va
leo Ser
vic
e
-
S
oc
iété
par
Ac
tions
S
im
plif
iée -
C
ap
ital 12.900.00
0 €
-
306
486 40
8 R.C.
S.
Bobi
gn
y -7
0,
r
ue
P
le
ye
l 93200 Sa
int-
Denis
-
F
ran
ce