Valeo beep & park User Manual

Other manuals for beep & park: Instruction Manual, Instruction Manual

Page of 11

Download

Print this page

Bookmark us

Product description

Camera module that supervises all 4 driving assistance functions :

•

All four functions are housed in the camera module,

facing the road.

• The system starts automatically as soon as the vehicle starts and scans the road permanently.

• All of the guideo functions can be easily configured or switched off using the

remote control.

•

Lane departure

alert

•

Keep in lane

assistance

•

Video recording

of a potential accident

• Alert that vehicle in front

has moved away

1/11

1) The Lane alert function

uses an algorithm to detect when

the vehicle crosses white

road markings

and immediately informs

the driver with an

audible alert or voice message

. A warning is

given as soon as the vehicle crosses the line, leaving the driver

enough time to regain control of the vehicle.

2) The Optilane function

uses an algorithm to spot any

vehicle

drift in relation to the road markings

and immediately informs the

driver, who can then correct the trajectory accordingly. The driver is

informed as soon as the vehicle drifts to the left or the right for more

than 5 seconds.

The Lane Alert and Optilane functions

are deactivated

when the driver uses the indicators

. The system is compatible

with white and yellow road markings.

3) The Video box function

films 20-second video sequences in

the event of

sudden acceleration or deceleration

. The system

films the moments immediately before and after an impact.

The videos can then

be transfered to a PC

via a USB

connection, to be viewed or sent.

The Video box system can also be switched on manually

by the driver at any time.

4) The Beep&watch function

uses a change in images to

identify

movement in front of the vehicle

, and informs the driver

when the car in front has moved off. The system comes on after the

vehicle has been at a standstill for 3 seconds.

What is it ?

How does it work ?

1 2 3 4 5 6 7 Next › »

Summary of beep & park

Page 1
Product description camera module that supervises all 4 driving assistance functions : • all four functions are housed in the camera module, facing the road. • the system starts automatically as soon as the vehicle starts and scans the road permanently. • all of the guideo functions can be easily co...
Page 2: 2/11
Camera module : • a single multi-function camera. • visual and vocal alerts. • led screen integrated on the back of the module. • integrated loud speaker. • detachable camera for protection against theft. • works in poor light ( remote control: • modular functions. • language selection • selection o...
Page 3: Technical Specifications
Technical specifications a universal product power supply 12v/24v (rated voltage: 8v~36v) camera type camera size/weight 120 x 75 x 37 mm / 145 g recording resolution h 320 x v 240 minimum ram/disk space required 256 mb/40 mb software compatibility pc windows 2000/xp/vista operating temperature from...
Page 4: 4/11
Installation time 1 hour ÌÌ 4/11 tools required: 1. Wire stripper pliers 2. Screwdriver set 3. Insulating adhesive tape 4. Wire-cutting pliers 5. Multimeter 6. Soldering iron as the battery must be disconnected during installation, some data may be lost (radio station settings, vehicle locking co...
Page 5: 5/11
5/11 • clean and degrease the interior of the windscreen • position and stick the template provided under the central rearview mirror there are two possible configurations: windscreen-mounted central rearview mirror: position the template, sliding the larger notch under the mirror mounting ceiling-m...
Page 6: Installation Guide
Installation guide 3. Connecting guideo on certain vehicles equipped with an onboard computer, an error message may be generated when the system is connected to the turn indicators (because the connection is interpreted as a defect). In this case, you must add an anti-feedback diode to the connectio...
Page 7: Installation Guide
Installation guide 7/11 • check that the camera module switches on and off with the engine. • check that the turn indicators are connected properly. A "left turn indicator" and "right turn indicator" signal should be displayed on the camera's rear screen when the turn indicators are activated: [ : o...
Page 8: 5. Final Adjustments
5. Final adjustments • selection of the vehicle type : this button is used to set the vehicle type. Make sure that it is set correctly; a faulty setting can undermine the performance of guideo. The vehicles are classified according to the height of the camera module and the vehicle width. Installati...
Page 9: After Installation
After installation see the user manual on the cd-rom supplied with the product guideo user manual 9/11 recommandations in daily use keep guideo dry when cleaning the vehicle interior . Water can damage the electronic circuits and cause fire or electric shock. Avoid contact with chemicals and deterge...
Page 10: After Installation
After installation troubleshooting no sound comes out of the device : check if the power cable is correctly connected. If the power is not connected, no display comes on. Check if all the functions are disabled. Check if the sound level is minimized. If the sound level is low in noisy environment, t...
Page 11: After Installation
After installation troubleshooting (continued) optilane guide doesn't come on. Check how the led display is set.[ led display shows "00:00".] if either line is not present or both lines are very dim, this feature doesn’t operate appropriately. The device sometimes gets hot in hot summer or under dir...