Valeo PARK VISION Instruction Manual - page 4
4
5
4
5
Type/Mode: OSD camera
•
Video standard: PAL
•
Voltage: DC 12V
•
Power consumption: Approx 0 8W (Max )
•
Graphic sensor: 1/3” color sensor
•
Picture element: 628 (H) x 586 (V)
•
Horizontal resolution: 400 TV lines
•
Minimum illumination: < 2 Lux
•
View angle: 133°x108°x78° (DxHxV)
•
Operation temperature: Camera -30°C ~ +80°C
•
Technical Parameters / Rearview camera
It is recommended that installation is carried out by an
•
approved professional auto technician
park/vision™ helps provide assistance when reversing
•
and parking Driving skills, such as slowing down, use of
mirrors etc are always essential
To ensure clear view, please keep the camera lens clean
•
and keep it away from sharp items
Heavy rain or dirt on the camera may cause blurred
•
vision
The use of sensor fitting ring may be requested to adjust
•
the angle of the camera
If you wish to connect the system to an original navigation
•
system, please refer to your auto technician
On some vehicles equipped with many onboard
•
electronic devices, it is may be necessary to add a
power relay
Please ensure waterproofness of the camera in case it
•
would be fitted outside the bumper.
Caution
No reset
necessary
Size : 2 48’’
•
Display format : 640 (H) x 240 (V)
•
Number of pixels: ~150 000
•
Video mode: NTSC/PAL
•
Working current < 250 mA
•
Static current < 10 mA
•
Working temperature: -10°C ~ +60°C
•
Technical Parameters / Display