Valeo Speed/Visio Instruction Manual - page 4
NP
NP
Features
The head-up display (HUD) registers the speed signal,
transmits it to the central unit, and displays the data on
the windshield. This way the driver can always remain
concentrated on the road.
The system warns the driver vocally in case of speeding,
depending on the speed threshold registered.
•
•
Dimensions: 78 x 48 x 19 (L x W x H)mm
Operating Voltage: DC10V~DC15V
Power Consumption: 350mA
Max. Brightness: 5500 cd/m² (Brightness can be
adjusted according to the ambient light source)
Operating Temperature: -20°C ~ +85°C
•
•
•
•
•
Technical Parameters
It is recommended that installation is carried out
by an approved professional auto technician.
This product can only be installed inside the car.
The speed adjustment settings must not be made
while driving.
The battery must be disconnected before
installation, which means that certain stored
data, e.g. radio settings, will be lost.
Please make sure that the display cannot harm
passengers in case of accident and that it is not
in the driver’s line of vision.
Keep the cable away from high temperatures and
movable areas before connecting the wires, to
avoid it melting from heat or short circuits.
The display should not be installed within the
operating range of the airbag.
The display is for reference purposes only.
Please drive according to the indications given
by the vehicle’s originally equipped instruments.
•
•
•
•
•
•
•
Caution