1. DL manuals
  2. Valet
  3. Intercom System
  4. System One
  5. Owner's Manual

Valet System One Owner's Manual

Other manuals for System One: User Manual, Installation Instructions Manual

Summary of System One

  • Page 1

    System one by ® home communication equipment owners manual rev 2.

  • Page 2: Table of Contents

    1 table of contents introduction…………………………………………..………………………………..2 features include parts identification…………………………………………..……………………..3 powering up the system……………………………………………………..…….3 mode definitions……………………………………………………………………….4 music mode monitor mode privacy mode paging calls……………………………………………………………...

  • Page 3: Introduction

    2 introduction the system one home communication system provides the simplicity and reliability of digital technology and can be installed using up to 20 stations offering great flexibility and convenience. Features include: paging and select call capability so you can target your calls to individua...

  • Page 4: Parts Identification

    3 parts identification door station 21 louvered door station decor door station room station . . 16 23 24 6 20 19 22 18 1 17 vol 0 1 2 3 4 5 6 max 1 2 3 4 5 6 7 8 mon mus priv clr house door aux 3.

  • Page 5: Powering Up The System

    4 powering up the system 18/2 cable should be connected from the transformer to the dc power booster, this distance should not exceed 16 feet. The dc power booster unit should be connected directly to the systems most central room station. Cable for this connection is provided on the dc power booste...

  • Page 6

    5 monitor mode any station set to this mode can be listened to by other stations for example; to ensure that a baby is sleeping soundly or that a sick child or an elderly parent is comfortable at night. To select monitor mode: press the ‘monitor’ key 23 (the green light will come on indicating the m...

  • Page 7: Paging Calls

    6 paging calls a paging call communicates to all other stations with the exception of door stations and is the best method of speaking to someone if your not exactly sure where they are. To page all stations: press and hold the ‘house’ key 1 at master or any room station the green light will turn on...

  • Page 8: Select Calls

    7 select calls a select call directs communication to a particular station or group of stations within the system with the exception of door stations. If your system has been programmed for double digit format to allow for more than eight select call channels, refer to section “initiating a select c...

  • Page 9: Door/gate Station Operation

    8 important exceptions stations with volume controls turned to minimum will not receive any calls stations set to privacy mode will not allow a ‘hands free reply’ do not initiate a call if the red light is flashing as this indicates that someone is already using the system to communicate door/gate s...

  • Page 10: Auxiliary/lock Output

    9 auxiliary/lock output electronic door locks, automatic gates, courtesy lights, alarm panic circuits, etc. Can be controlled from the master or any room station if optional auxiliary output boards have been fitted to your system. These outputs can be programmed to time out or toggle depending on th...

  • Page 11: Programming Options (

    10 programming options ( system one w/vr102 board only ) in program mode system one room stations can have the following options programmed: 6 wire or 8 wire operation (installer option) single digit or double digit operation for select calls (installer option) keypad back lighting - on or off (user...

  • Page 12

    11 changing room station coding for the purpose of select calling (calling individual or grouped stations) each station must be allocated a number between 1 and 8 (single digit) or 11 and 38 (double digit). If more than one station is allocated the same number, the stations having the same number wi...

  • Page 13: Trouble Shooting

    12 trouble shooting because system one automatically resets at the completion of all intercom call functions, there are few areas, once installation and testing has been completed and the instructions read, that should cause you any problems. In this manual there are various notes and important exce...

  • Page 14: Technical Specifications

    13 technical specifications intercom digital control circuitry electret microphones wide dynamic range independent amplification speakers cloth suspension, single cone 102 mm, 16 ohm, 10 watt with 3 ounce magnet power requirement 13.8v dc regulated supply (current rating dependent on size of system).

  • Page 15

    14 room station dialing list _______________________ _______________________ _______________________ _______________________ _______________________ _______________________ _______________________ _______________________ _______________________ _______________________ _______________________ _______...

  • Page 16: Notes

    15 notes.