Valley Comfort Systems PEGASUS 9703 Owner's Installation And Operation Manual

Summary of PEGASUS 9703

  • Page 1

    Page 1 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 blaze king products pegasus 9703 gas appliance owner's installation and operations manual save these instructions blaze king industries 146 a street walla walla wa 99362 ph# 1-509-522-2730 fx# 1-509-522-9803 valley com...

  • Page 2

    Page 2 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 dear customer: thank you for purchasing this blaze king gas appliance. It is our goal to have every purchaser of a blaze king stove be a satisfied customer. This owner’s manual explains the steps required to safely ass...

  • Page 3: Table Of Contents

    Page 3 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 specifications model 9703 ........................................................................................................... 4 safety notice .......................................................................

  • Page 4: Specifications - 9703

    Page 4 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 specifications - 9703 gas appliance rating natural gas l p gas freestanding / insert freestanding / insert input rating (btu/hr) 0-610m (0-2000 ft.) alt 44,000 42,000 orifice size (dms) 610m #48 ( front) & #33 (back) #...

  • Page 5: Safety Notice

    Page 5 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 cautions never vent the appliance to other rooms or buildings. The appliance must be vented to the outside only . Never burn the appliance with the viewing door open. Fire extinguisher: every home should have at least ...

  • Page 6

    Page 6 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 gas stoves manufactured by blaze king industries and/or valley comfort systems inc. Are covered by a limited lifetime warranty against manufacturers defects in material and workmanship. Details of this comprehensive wa...

  • Page 7: White Mineral Deposits

    Page 7 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 the front door of your new blaze king direct vent is gasketed and has been adjusted for a tight seal. As with all direct vent appliances, a tight seal is necessary for maximum performance and proper venting of combusti...

  • Page 8: Approval Label

    Page 8 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 approval label wh- this stove is factory equipped for 0- natural gas • propane gas • tested to ansi z21.88b-2003•csa 2.33b-2003 “vented gas fireplace heaters” and can/cga 2.17 –m91”gas-fired appliances for use at high ...

  • Page 9: Caution

    Page 9 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 electrical grounding instructions electrical grounding instructions warning: the appliance, when installed, must be electrically grounded in accordance with local codes or in the absence of local codes with the current...

  • Page 10: Caution

    Page 10 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 the appliance and venting should be inspected before use and annually afterwards by a qualified service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding materials, etc. It i...

  • Page 11

    Page 11 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 main shroud - fig. 27 wire support bracket - fig. 29 outer top - fig. 28 valve bracket z9723 - 9703 pegasus insert kit contents lower left and right shroud - fig. 26 fasteners - fig. 30 cover plates top trim.

  • Page 12

    Page 12 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 position main shroud - fig. 36 install main shroud assembly - fig. 37 screw and hole identification - fig. 32 attach outer top to main shroud - fig. 35 z9723 - 9703 pegasus insert kit assembly 4 screws “warning: failu...

  • Page 13

    Page 13 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 contents description part number quantity main shroud 9781 1 left lower shroud r8185 1 right lower shroud r8184 1 left upper shroud bracket r8186l 1 right upper shroud bracket r8186r 1 valve bracket r8144a 1 wire supp...

  • Page 14

    Page 14 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 15. Locate the burner switch/piezzo button assembly secured adjacent to the valve. Cut the tie wrap and move the assembly over to the right shroud and line up the two hole two holes on the switch bracket with the hole...

  • Page 15: Air Shutter Adjustment

    Page 15 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 there are two air shutters that require adjustment. The second air shutter is opposite of the one illustrated below. The shutter should be 1/2 way opened for natural gas and fully opened for liquid propane. These shut...

  • Page 16: Gas Connection

    Page 16 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 the gas line may be installed at this time. Make sure to follow all provincial and local codes. Blaze king recommends that gas connections be made by a licensed and qualified installer. The appliance can be connected ...

  • Page 17: 9703 - Flue Venting

    Page 17 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 warning always refer to current local, state or provincial codes and vent manufacturing specifications for a safe and efficient installation. Caution: each of the vent manufacturers have their own method of connection...

  • Page 18: Lp Or Natural Gas

    Page 18 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 conversion kit should include regulator, main burner orifice (x2), and pilot orifice. Caution: before proceeding with the conversion the gas supply must be shut off prior to disconnection the electrical power. 1. .......

  • Page 19: Honeywell

    Page 19 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 pilot flame should look like this top view of burner natural gas lp gas manifold pressure (in w.C. / kpa) 3.5 / 0.87 11.0 / 2.74 collecteur de pression (in w.C. / kpa) manifold pressure lo setting (in w.C. / kpa) 1.3 ...

  • Page 20: Lighting Preparation

    Page 20 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 for your safety - read before lighting warning - if you do not follow these instructions exactly, a fire or explosion may result causing property damage or personal injury. A. This appliance has a pilot that is lit wi...

  • Page 21: Lighting Instructions

    Page 21 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 1. Stop! Read the safety information on the previous page. 2. Controls are accessed by opening the right side door panel. 3. Set the optional wall thermostat to lowest setting or switch the stove on/off switch to the ...

  • Page 22: Insert

    Page 22 om-9703 date printed: thursday, july 05, 2007 revision date: march 6, 2006 9703 - replacement parts list part name: part # 1. Robertshaw gas valve 0718a honeywell gas valve 0720 2. Fan 0719b 3. Main burner switch 0725a 4/5/6. Log set (3 piece) 0813 7. Piezzo push button igniter 0737 8. Shrou...