- DL manuals
- Vallox
- Ventilation
- 180SE
- Instructions For Use And Maintenance Manual
Vallox 180SE Instructions For Use And Maintenance Manual
Summary of 180SE
Page 1
Digit sed electronic controller with lcd display • 1.09.283e • 19.8.2008 • tyyppi 3486 © vallox instructions for use and maintenance electronically controlled supply / extract ventilation with heat recovery © vallox • we reserve the right to make changes without prior notification. Se.
Page 2: Vallox 180 Se
Vallox 180 has been initially adjusted for normal circumstances in your home. Ventilation adjustment is needed mainly in the following circumstances: vallox 180 se table of contents 2 2 vallox 180 models code: 3486 vallox 180 ac • equipped with ac fans vallox 180 dc • equipped with dc fans letter l ...
Page 3: Vallox 180 Se
Autumn • wash or change the coarse filter and clean or change the fine filter if needed. • check that the heat recovery cell is clean. • check that the condensing water outlet is not clogged. • switch the post-heating radiator on. Spring: • wash or change the coarse filter and clean or change the fi...
Page 4: Digit
Digit sed electronic controller with lcd display vallox 180 se 4 instructions for use 2. Instructions for use for indoor air to stay healthy and beneficial also for the structures of the dwelling, ventilation has to be in operation continually. It is not advisable to stop ventilation even for longer...
Page 5: Vallox 180 Se
Vallox 180 se instructions for use 5 © vallox • we reserve the right to make changes without prior notification. 2.4. Ventilation control with carbon dioxide sensor (option) • in carbon dioxide control, vallox 180 se adjusts fan speed so as to keep carbon dioxide content in the ventilation zone belo...
Page 6: Vallox 180 Se
Vallox 180 se 6 instructions for use 2.8. © vallox • we reserve the right to make changes without prior notification. Remember! Switch post-heating off when it starts to get too warm in the dwelling becau- se of warm weathers. Switch post-heating on again when it gets cooler in autumn. 2.8. Post-hea...
Page 7: Vallox 180 Se
Vallox 180 se pressure difference switch instructions for use © vallox • we reserve the right to make changes without prior notification. 7 2.12. Heat recovery antifrost function and preheating • antifrost prevents the heat recovery cell from freezing, thus ensuring proper ventilation even in cold p...
Page 8: Vallox 180 Se
Vallox 180 se instructions for use 8 © vallox • we reserve the right to make changes without prior notification. 2.16. Fireplace switch function / boosting fireplace switch function • the fireplace switch stops the extract air fan for 15 minutes and produces overpressure in the ventilation zone. Thi...
Page 9: Vallox 180 Se
Vallox 180 se 9 instructions for using the control panel © vallox • we reserve the right to make changes without prior notification. Fan speed (3). Supply air temperature (21 °c). Post-heating is on. Time. Filter guard alert. Maintenance reminder alert. Fireplace / booster switch on. The fireplace /...
Page 10: Vallox 180 Se
Vallox 180 se instructions for using the control panel 10 © vallox • we reserve the right to make changes without prior notification. 3.3. Settings menu you can reach the settings menu from the operating menu as indicated in section 3.2.2. The displays of the settings menu (sections 3.3.1.–3.3.26.) ...
Page 11: Vallox 180 Se
The preheating temperature for the defrost function in the heat recovery cell is chosen with the + and – buttons. 3.3.24. Pre-heating temperature for the defrost function in the heat recovery cell preheater 07c vallox 180 se 11 instructions for using the control panel © vallox • we reserve the right...
Page 12: Vallox 180 Se
Vallox 180 se 12 instructions for using the control panel © vallox • we reserve the right to make changes without prior notification. Basic fan speed = 1 maximum fan speed = 8 carbon dioxide adjustment (co 2 ) = 900 ppm co 2 adjustment interval = 10 min. Freezing protection (cell) = 6 °c freezing pr...
Page 13: Vallox 180 Se
Vallox 180 se maintenance instructions 13 the fine filter (b) is not washable. Clean it at the same time as the g3 class filters by vacuuming it with a brush nozzle. When cleaning, be careful no to break filter material. To ensure good supply air quality, replace the filter preferably every year, an...
Page 14: Vallox 180 Se
Vallox 180 se 14 maintenance instructions 4.3. Water-circulating post-heating radiator (option) for cleaning the water-circulating post-heating radiator, remove the filters and heat recovery cell. Clean the post-heating radiator while it is in place in the unit either by vacuuming or by blowing it w...
Page 15: Vallox 180 Se
15 vallox 180 se troubleshooting © vallox • we reserve the right to make changes without prior notification. Outdoor air coming to the dwelling is cold. Symptom reason do this • air cools down in the attic ducts. • the heat recovery cell is frozen, which is why extract air cannot heat outdoor air. •...
Page 16: Vallox 180 Se
"bus fault" message is displayed and the unit operates at speed 1 (check the fan speed). • wiring fault in the carbon dioxide sensor, in the control panel or in the humidity sensor. 9 • contact a maintenance company. The connections have to be checked and corrected if necessary. "freezing alert" mes...