Valor 1200EAN Installation & owner's manual - page 34
34
Remote Control Handset Wall Holder Installation
The remote control kit for this
fi replace comes complete with a
wall-mounted holder. This holder
is not required in all installations
but is provided as an optional
feature for those customers who
wish to mount the remote handset
to the wall.
To install the holder to the wall,
fi nd a convenient location and
use the hardware provided with
the kit. See the diagram below
for required hardware and
confi gurations. Note that the
holder can be installed at the
base of a light switch plate.
IMPORTANT
. The location of
the remote control handset
is important to assure proper temperature regulation. To obtain a constant temperature, we recommend that the
handset should be between 3 and 15 feet away from the appliance but not directly above it. We also advise that
the handset should be located away from any other heat source and not in direct sunlight as this may affect the
temperature sensor located in the remote handset.
Packing Contents:
1 Wall Bracket A
2 Screws B
1 Screw C
2 Wall Anchor D
1 Spacer E
(detach before assembly)
1 Wall Bracket F
Switch Plate
Alternative 1
Alternative 2
Alternative 3
Read the important safety information on
pages 3 and 5 of this manual.
Operating Your Fireplace
For your safety, this appliance is fi tted with a fl ame
supervision device which will shut-off the gas supply
if, for any reason, the pilot fl ame goes out. This device
incorporates a fi xed probe, which senses the heat
from the pilot fl ame. If the probe is cool, the device will
prevent any gas fl ow unless manually lighting the pilot.
See full lighting instructions on page 44 of this manual.
Owner’s Information
Performance of LPG appliances may be affected by
the quality of commercial gas supplied in your area.
Warranty
Card at the
back of this
manual.
Do not put
furniture or other objects
in this space in front of
the fireplace:
36” (0.9 m)
Fireplace
Hearth
WARNING
EXTREMELY HOT!!!
• Some parts of your fi replace are EXTREMELY
HOT
, particularly the window.
• DO NOT LET CHILDREN touch the glass or
any parts of your fi replace even after it is turned
off as it is still hot.
• USE A SAFETY SCREEN or a GATE to reduce
the risk of burns.
• Keep the remote control handset OUT OF
REACH
of children.
•
• Some materials or items, although safe, may
Some materials or items, although safe, may
discolor, shrink, warp, crack, peel, and so on
discolor, shrink, warp, crack, peel, and so on
because of the heat produced by the fi replace.
because of the heat produced by the fi replace.
AVOID PLACING
AVOID PLACING
candles, paintings, photos,
candles, paintings, photos,
and other items
and other items SENSITIVE TO HEAT
SENSITIVE TO HEAT
within
36 inches (0.9 m) around the fi replace.
•
• HOT HEARTH / FLOOR!
HOT HEARTH / FLOOR!
The hearth or fl oor
The hearth or fl oor
in front of the fi replace may become very hot
in front of the fi replace may become very hot
when the fi replace heats. Do not use the hearth
when the fi replace heats. Do not use the hearth
as a seat or shelf. Solid wood fl ooring in front of
as a seat or shelf. Solid wood fl ooring in front of
the fi replace (if allowed) may shrink during the
the fi replace (if allowed) may shrink during the
heating season due to heat.
heating season due to heat.
INSTALLATION