Valor 1265WSK Installation & Operating Instructions Manual

1

©2012, Miles Industries Ltd.

The optional Wall Switch Kit 1265WSK can be installed 

to operate the fi replace. The kit includes the switch plate 

and  cover plate (available in white only) and a 26 feet 

(8 m) long wiring harness. The wall switch allows to light 

and turn the fl ame up or down but has no thermostat 

or program features. The wall switch can be used in 

conjunction with the thermostatic remote control. 

All wiring associated with this kit is low voltage (6 volts). 

Special considerations are required if ganging this 

switch with other switches of different voltage. Consult 

your electrician.

Switch 

plate 

(white)

Cover 

plate 

(white)

4001942-02

1265WSK

Control Wall Switch Kit

for Valor fi replaces equipped with GV60 valve

Installation & Operating Instructions

To be used only with Valor fi replaces

• 

Press ON-OFF button once to light 

pilot. Press again to shut of pilot.

• 

Press and hold large fl ame     

button to gradually increase 

fl ame height.

• 

Press and hold small fl ame    

button to gradually decrease 

fl ame height.

The Wall Switch can be used to 

control your fi replace. You can 

turn the pilot on or off and you can 

increase or decrease the fl ame 

height. 

Note that the thermostat and 

programming functions are not 

available with the wall switch.

Wall Switch Operation

To turn appliance ON and OFF

To adjust fl ame height

f i r e - p a r t s . c o m