Valor 534 Installation Instructions Manual
4001086/04
613CCB Contemporary Cast Front Black
INSTALLATION INSTRUCTIONS
CSA approved for use
only
with
Valor Models 534 and 535 Heaters
The 613CCB Contemporary Cast Front Black may be fitted to any Valor models 534 or 535 heaters, either at the
time the heater is installed or retrofitted afterwards (provided existing wall and hearth finish allow – see diagrams).
The installation of the Contemporary Cast Front has specific mantle clearances and framing dimensions described
below,
which differ from those listed for other trims used with 534 and 535 heaters
. Refer to the installation
manual packed with the heater for all other aspects of installation.
The 613CCB requires the installation of non-combustible material above the heater when fitted to the
535 model heater
.
NOTE: This kit MUST be installed
at finish hearth height.
Kit Content
Assembly Overview
Note:
This kit must be installed or serviced by a qualified installer, service agency or gas supplier.
These instructions are to be used in conjunction with the main installation instructions for the above
listed model.
WARNING: If the information in these instructions is not followed exactly, a fire or explosion
may result causing property damage, personal injury or loss of life.