Valor 555CFK Installation And Operating Instructions Manual - page 8
MAINTENANCE
This fan does not require any regular maintenance or lubrication; however, periodic cleaning of the
unit compartment to remove household lint will help to maintain peak performance and extend the fan
life.
This space can be accessed by opening the lower door or removing the front. Using a crevice tool on
the end of a vacuum cleaner hose, carefully clean the bottom area of the fireplace linerbox, paying
particular attention to the area under the burner box base.
Should the fan require additional servicing, it must be done by a qualified gas appliance service
person.
Over time, it may be useful to clean the fan blades themselves for dust accumulation. To do this, it is
necessary to remove the burner assembly. This must be done by a qualified gas appliance service
person.
WIRING DIAGRAM
Warning- Electrical Grounding Instructions
This appliance is equipped with a three-prong (grounded) plug for your protection against shock
hazard and must only be plugged directly into a properly grounded three-prong receptacle. Do not
cut or remove the grounded prong from this plug. Alternatively, it may be hard wired by a qualified
electrical installer.
MODEL 555CFK - OPTIONAL BLOWER KIT
MILES INDUSTRIES LTD.
BLOWER
THERMO
SENSOR
POWER CORD
OFF-ON SWITCH
SPEED CONTROL
Electrical Schematic
555CFK