Valor 700 Operating Instructions Manual

1

GV60 MAX

O

PERATING

 I

NSTRUCTIONS

The GV60 MAX Electronic Ignition Remote Control 

system is used on the Valor heaters 

models 700, 780 and 785

July 2012

Remote Control Initial Set-up 

The receiver and the handset of the remote control sys-

tem must be initially synchronized before the  rst use.

1.  Insert alkaline batteries in the remote control 

receiver and handset. The receiver is located left of 

the control valve under the burner module.

2.  With a sharp object, press and hold the receiver’’s 

reset button until you hear one short and one long 

beeps. Release the reset button after the second 

beep.

3.  Within the subsequent 20 seconds, press the small 

 ame button (     ) on the remote handset until you 

hear two short beeps con rming the sychronization 

is set.

This is a one time setting only and is not required when 

changing the batteries in the remote receiver. The 

remote control system is now ready to use.