Valor 725RTB Black Installation Instructions

Page of 4

Download

Bookmark us

4004914-02

725 Riser Kit

Installation Instructions

Use with Valor 700, 738 & 739 Models only

The 725 Riser is intended to be used on Valor heaters models 700, 738 & 739. Mounting of the 725 does not affect

clearances or other specifi cations listed in the heater installation manuals—see installation manual supplied with the

heater for more information.

The Insert appliance is approved for shimming underneath using combustible material.

40” (1016 mm)

3-15/16”

(100 mm)

2-1/2”

(64 mm)

Compatible with 700 (G3.5)

709 - 3 sided fl oating trim includes

710 backing plate only

717BPB - Backing plate for Edgemont 716 or 721

719BPB - Backing plate for Edgemont 716 or 721

Overview

700/738/739 engine

725 is a 2.1/2” high sheet metal riser that fi ts beneath

the fi replace engine and various trims to raise the

heater to cover a higher fi replace opening.

Compatible with 738/739 (G3)

741, 742, 743, 744, 745 & 772 - Standard insert fronts

746 - Contour trim kit

756 - 3 sided square trim kit

Page 1
4004914-02 725 riser kit installation instructions use with valor 700, 738 & 739 models only the 725 riser is intended to be used on valor heaters models 700, 738 & 739. Mounting of the 725 does not affect clearances or other specifi cations listed in the heater installation manuals—see installation...
Page 2
2 designed and manufactured by / for miles industries ltd. 190 – 2255 dollarton highway, north vancouver, b.C., canada v7h 3b1 tel. 604-984-3496 fax 604-984-0246 www.Valorfi replaces.Com because our policy is one of constant development and improvement, details may vary slightly from those given in ...
Page 3: Base De Soulèvement 725
3 base de soulèvement 725 directives d’installation utilisez avec les foyers encastrables legend valor 700, 738 et 739 seulement la base de soulèvement 725 est conçue pour être utilisée avec les foyers 700, 738 et 739. La base n’affecte pas les dégagements ou autres caractéristiques indiquées dans l...
Page 4
4 installation placez la base sous l’avant du foyer déjà surélevé à l’aide de cales et centrez-la. Liste de pièces la base se place égale à l’ouverture de la cavité une cale en matériau combustible peut être utilisée sous le foyer description numéros de pièces 725rtb noire base 4004913az vis 8 x 32 ...