Valor 745 Clearview Front Kit Installation Instructions Manual
4001761-08
Note: This kit must be installed
by a qualifi ed installer, service
agency or gas supplier. These
instructions are to be used in
conjunction with the fi replace
main installation instructions.
745 Clearview Front Kit
CSA approved for use ONLY with Valor Heater Models 738, 739
and RF24XB when installed in RA24ZC Zero Clearance Kit
Installation Instructions
I N S TA L L E R
Leave this manual
with the appliance.
C O N S U M E R
Retain this manual
for future reference.
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
WARNING
!
A barrier designed to reduce the risk of burns from the hot viewing
glass is provided with this appliance and shall be installed
for the protection of children and other at-risk individuals.
L
EGEND
G3
The 745 Clearview Front is designed to
be used along with an outer surround
trim (supplied separately).
The Clearview Front fi ts within the
outer surround trim and clips onto the
standard mounting brackets supplied
with the 738 and 739 heaters or the
RA24ZC Zero Clearance Kit.
The Clearview Front is compatible with
all outer surround trims and cast iron
surrounds available for use with the
738 and 739 heaters and the RA24ZC
Zero Clearance Kit.
738, 739 or
RF24XB in
RA24ZC
3-Sided
Outer Trim
Fret
Clearview Front
Barrier Screen
Window Trim
(738/739 only)
Extension Baffl e
(738 only)
Convection Baffl e
(739 only)
© Copyright Miles Industries Ltd., 2014
Overview
(Heater, outer trim, fret sold separately)