Valor 814 GEORGIAN Installer And Owner Manual

Summary of 814 GEORGIAN

  • Page 1

    5109270/02 installer and owner guide this guide is intended to help you install and care for your valor electric heater. Please read carefully before installing and using your heater. However, if further information is required, our valor technical helpline will be pleased to help. Telephone 08706 0...

  • Page 2

    Safety first. Valor fires are ce approved and designed to meet the appropriate british standards and safety marks. Quality and excellence. At the heart of every valor fire. All valor fires are manufactured to the highest standards of quality and excellence and are manufactured under a bs en iso 9001...

  • Page 3: Customer Care

    S customer care thank you for choosing valor all valor heaters are designed to meet the most stringent quality, performance and safety requirements to provide our customers with many years of trouble free service. This guide aims to improve your understanding and appreciation of your new valor heate...

  • Page 4: Installation

    Always always install the heater in accordance with the instructions. If in doubt obtain expert advice. Always make sure the electrical socket is accessible and located adjacent to, but not above the heater. Always disconnect the heater from the electrical supply before carrying out cleaning, mainte...

  • Page 5

    Maintained (see figure 1). The heater must not be located under a fixed electrical socket, the socket must always be accessible in order to disconnect the heater from the electrical supply for maintenance or when replacing a lamp. Although the stove complies with all the safety standards, some kinds...

  • Page 6

    Authorised service agent, or a similarly qualified person. All external wiring between the appliance and the electrical supply, including the earth, shall comply with current iee regulations. Operating the heater never cover the heater. There is a risk of fire if it is covered. The heater is operate...

  • Page 7

    2. Remove the accessible loose coals and lift out the fuel support (see figure 3). 3. Slide off the coloured lamp shroud 4. Replace the faulty lamp with an 18 - 20 w (maximum) edison screw, compact fluorescent lamp e.G. 'philips ecotone' only. Do not use ordinary tungsten lamps, they get too hot. 5....

  • Page 8

    Useful telephone numbers to help us quickly help you, please try to have the following information available before you contact us: your post code type of fire model / name serial number the fault, problem or request general advice about gas and your gas fire: valor technical helpline 08706 061 065....