1. DL manuals
  2. Valor
  3. Electric Heater
  4. 843
  5. Installer And Owner Manual

Valor 843 Installer And Owner Manual

Summary of 843

  • Page 1

    5133695/01 model 843 electric heater fitted with a dream fascia. (gc no. Ef-032-37) important: please keep your guide in a safe place for future reference. Installer and owner guide this guide is intended to help you install and care for your valor fires electric heater. Please read carefully before...

  • Page 2: Plumbnation.Co.Uk

    The nation’s favourite for plumbing & heating supplies secure payments shop online with confidence free shipping on all orders over £100 to mainland uk finance available spread the cost with low interest rates price match always get the best deals available boilers radiators heating controls pipes &...

  • Page 3

    © baxi heating u.K. Limited 2008. All rights reserved. No part of this publication may be reproduced in any material form (including photocopying), stored in any medium by electronic means (including in any retrieval system or database) or transmitted, in any form or by any means, whether electronic...

  • Page 4: Safety First.

    Safety first. Valor fires heaters are ce approved and designed to meet the appropriate british standards and safety marks. Quality and excellence. All valor fires heaters are manufactured to the highest standards of quality and excellence and are manufactured under a bs en iso 9001 quality system ac...

  • Page 5: Important Instructions.

    Before continuing any further with the installation of this heater please read the following: important instructions. A carry handle is fitted to the top of the heater. We recommend that this is used when moving the heater. The approximate lifting weights (kg) of the heater parts are listed below: m...

  • Page 6: Never

    Always disconnect the heater from the electrical supply before carrying out cleaning or maintenance. Always use a fireguard when young children and infirm persons can come into contact with the heater. Always use genuine valor fires spares. Never never leave children unsupervised in a room where the...

  • Page 7: Spacer Frame Kit 0582631.

    The following kit is obtainable either from your heater supplier or direct from valor fires sales. Spacer frame kit 0582631. Important: before continuing with the installation of this heater please ensure that you have completed the information on the last page of this guide. Please read this sectio...

  • Page 8: Supplied With The Heater?

    Q what opening size do you need in the surround or fireplace opening? A this heater can be fitted into fireplaces or surrounds where the following dimensions are available. Width 395mm - 450 mm height 555mm - 590 mm depth at least 145mm q do you want to fit the heater into a surround using the space...

  • Page 9

    Fitting the batteries to the remote control handset. The remote control handset uses 2 x 1.5v aaa type batteries. For longer battery life use only alkaline batteries. To install the batteries, slide the cover down on the rear of the handset and remove (see figure 2). The polarity of the batteries is...

  • Page 10: Securing The Heater.

    Securing the heater. The contents have been identified in figure 3 (fascias are not included). Contents quantity (illustrations are not to scale) heater 1 spacer frame 1 no. 8 x 3/8 pan head screw 5 tension wire 1 screweye 1 wood screw 5 wall plug 5 ‘aaa’ battery 2 cable clamp 1 handset 1 m4 x 25mm ...

  • Page 11

    The heater must be secured into position to prevent it from being tipped over. The following securing options are available: method a - securing the heater with screws. Method b - securing the heater with wire. Method c - securing the heater using the spacer frame supplied with the heater. Method d ...

  • Page 12: 10.

    Although this section deals with fireplace openings without a spacer, this method of securing the heater can also be used with the spacer frame supplied with the heater (see method c). It can also be used with the optional spacer frame (see method d). 1. The fixing kit supplied with the heater inclu...

  • Page 13: Fitting The Spacer Frame

    Method c - securing with the spacer frame supplied with the heater. The spacer frame is for use in installations where the chimney recess or rebate in the surround / mantle is not deep enough to take the full depth of the heater. The minimum rebate / depth required is 65mm. For your safety the frame...

  • Page 14: 0582631.

    Method d - securing with the optional spacer frame supplied in kit 0582631. The optional spacer is for use where a flat wall installation is required. 1. There are four screws supplied with the optional spacer frame. The narrow flange of the optional spacer should be placed against the spacer suppli...

  • Page 15: Fitting The Dream Fascia.

    Fitting the dream fascia. 1. Remove the fascia from its packaging. 2. Hold the fascia firmly and lift into place. Locate the fascia hanging brackets into those on top of the heater (see figure 10). Lower the fascia into place and swing the bottom of the fascia towards the heater. 3. Secure the fasci...

  • Page 16

    Never cover the heater or obstruct the opening at the base of the heater, this could cause overheating and consequent risk of fire. The appliance can be controlled by the manual control located on the lower left hand side of the heater or by using the remote control handset. Remote control - what do...

  • Page 17: What Does The Button Do?

    Manual control - what is it and why is it there? The manual control is there as a back up. If the remote control has been damaged, lost, or the batteries lives have expired, the manual control will enable the effect and heater to be operated. The control is located at the bottom left hand corner of ...

  • Page 18: Important Safety.

    Important safety. Before undertaking maintenance always disconnect the heater from the electricity supply by removing the 3 pin plug and allowing the heater to cool. How do i clean my heater? The heater and plastic parts need only to be wiped clean with a dry soft cloth; do not use polishes or abras...

  • Page 19: Environmental Protection.

    For spares inquiries spare parts are available nationwide via the ‘interpart stockist network’. For your local stockist consult yellow pages under ‘central heating’. When ordering spare parts please have the below information available. This will help us to deal with your call quicker and avoid you ...

  • Page 20: Our Promise To You

    Information for the customer standard warranty terms & conditions the warranty is for 12 months subject to contract. In the united kingdom servicing can be carried out either by a heateam service engineer or a suitably qualified person. You must register your heater with heateam, the service divisio...

  • Page 21

    What this warranty does not cover repairs to heaters which haven’t been installed properly and as set out in this guide. Faults caused by inadequate supply of electricity. Reimbursement of any third party repair or replacement costs that we haven’t been told about or agreed with you in advance. Comp...

  • Page 22

    Page 21 installer and owner guide © baxi heating u.K. Limited 2008..

  • Page 23

    Page 22 installer and owner guide © baxi heating u.K. Limited 2008..

  • Page 24

    Page 23 installer and owner guide © baxi heating u.K. Limited 2008. Brand (please tick) baxi valor wonderfire other........................ D d m m y y date of installation a label containing the fascia code may have been placed inside this box. Fascia name (block capitals) fascia code - can be foun...

  • Page 25

    © baxi heating u.K. Limited 2008..