Valor ALPHA 647 Owner's Manual

Manual is about: INSET LIVE FUEL EFFECT GAS FIRE INCORPORATING THE VALOR

Summary of ALPHA 647

  • Page 1

    3002614/01 owner’s guide this appliance is for use with natural gas (g20) when converted using conversion kit no.0591149 this appliance is for use with propane gas (g31) this appliance is for use in the united kingdom (gb) and the republic of ireland (ie) only. We trust that this guide gives suffici...

  • Page 2: Owner’S Guide

    Owner’s guide page 2 safety first. Valor fires are ce approved and designed to meet the appropriate british standards and safety marks. Quality and excellence. At the heart of every valor fire. All valor fires are manufactured to the highest standards of quality and excellence and are manufactured u...

  • Page 3: Owner’S Guide

    Owner’s guide page 3 c u s t o m e r c a r e thank you for choosing valor. All valor gas fires are designed to meet the most stringent quality, performance and safety requirements to provide our customers with many years’ trouble-free service. Your owner guide aims to improve your understanding and ...

  • Page 4: Owner’S Guide

    Owner’s guide page 4 graph 1 combustible shelf clearances safety if you smell gas don’t smoke extinguish all naked flames don’t turn electrical switches on or off turn off the gas supply at the meter open doors and windows to get rid of the gas immediately call the gas emergency service – see your l...

  • Page 5: Owner’S Guide

    Owner’s guide page 5 do • always use a fireguard complying with bs6539 or bs6778 for the protection of young children, the elderly or infirm. • wait three minutes before attempting to relight if the fire is switched off or the flames are extinguished for any reason. • get advice about the suitabilit...

  • Page 6: Owner’S Guide

    Owner’s guide page 6 appliance dimensions figure 1. Appliance dimensions.

  • Page 7: Owner’S Guide

    Owner’s guide page 7 figure 2. Control operating your fire please note when operating your fire for the first time, some vapours may be given off which may cause a slight odour and could possibly set off any smoke alarms in the immediate vicinity. These vapours are quite normal with new appliances. ...

  • Page 8: Owner’S Guide

    Owner’s guide page 8 figure 3. Lighting with a taper. The flame sensing device from shutting off the gas while its probe warms up as explained above. K if low heat is required, release the button. The button will automatically spring up to the low heat position shown in figure 2 (see note i). K for ...

  • Page 9: Owner’S Guide

    Owner’s guide page 9 cleaning to maintain the high performance and quality finish of your valor appliance, please follow these guidelines: • before attempting to clean the fire, please remember to turn off the fire and wait for the appliance to cool completely. The fire will retain heat for some tim...

  • Page 10: Owner’S Guide

    Owner’s guide page 10 figure 6. Front base coal position figure 5. Rear base coal position figure 4. Ceramic rear wall position refitting the ceramics 1. Fit the ceramic rear wall into the bracket at the back of the firebox .See figure 4. 2. Place the rear base coal in the firebox. It should rest on...

  • Page 11: Owner’S Guide

    Owner’s guide page 11 figure 11 figure 10 figure 9 figure 8 figure 7 4. Place a type “a” coal between the front and rear base coals with the letter “a” upright and so that the coal is against the left side of the firebox. See figure 7. 5. Place a type “b” coal between the front and rear base coals a...

  • Page 12: Owner’S Guide

    Owner’s guide page 12 maintenance regular maintenance in order to achieve and maintain high levels of personal safety and performance efficiency, it is essential that the opening at the back of the fire and the flue are kept clear of any form of obstruction. It is possible that deposits of mortar or...