Valor BG C-2 Owner's Manual - Owner’S Guide
OWNER’S GUIDE
Page 8
CLEANING YOUR FIRE
Turn the fire off and allow it to cool before
attempting any cleaning. Note that the fire will
retain heat for some time after it has been turned
off.
Metal parts
Clean the metal parts with a slightly damp cloth and
then dry.
Do not use abrasive cleaners, they could
scratch the surface.
To clean the inside of the window.
Before the window can be detached, the front units
will have to be removed as follows:
See figure 4.
•
Remove the bottom front casting.
•
Lift the fire front casting clear by lifting the fire
front casting up and forward to release the locating
screw heads at the back of the casting from the
keyholes in the surround sides.
•
Remove the two screws securing the bottom of the front
surround to the sides of the convection box
•
Raise the front surround to allow the retaining lugs at the
top to clear the slots in the convection box hood and then lift
clear.
Window removal & Cleaning
•
Unscrew and remove the three spring loaded window
fixing screws and washers from the base of the window
frame. See figure 5. Keep the screws and washers in a safe
place.
•
Gently swing the base of the window frame forward
while lifting the frame upwards. The window should lift
clear of the fire. Put the window in a safe place away from
your immediate work area.
•
Any stains on the glass can be removed with a non-abrasive cleaner such as a ceramic
hob cleaner.
Never use abrasive cleaners
.
Clean the window carefully in accordance
with the instructions supplied with the cleaner.
Figure 5 Window
Removal
Figure 4 front removal