Valor BR626 Owner's Manual

Summary of BR626

  • Page 1

    For 600b351/01 v a l o r b o l e r o ( m o d e l b r 6 2 6 ) i n s e t d e c o r a t i v e f u e l e f f e c t g a s f i r e s o w n e r g u i d e this owner guide is intended to help you care for your valor gas fire. Please read carefully before using your gas fire and keep for future reference. Th...

  • Page 2

    2 thank you for choosing valor. All valor gas fires are designed to meet the most stringent quality, performance and safety requirements to provide our customers with many years’ trouble-free service. Your owner guide aims to improve your understanding and appreciation of your valor gas fire by prov...

  • Page 3

    3 please note 1. The valor bolero is to be used only with the type of gas for which it has been supplied. Never attempt to use the appliance with other gas types. 2. Always use a fireguard complying with bs6539 or bs6778 for the protection of young children, the elderly or infirm. 3. The hearth in f...

  • Page 4

    4 operation of the fire 1. This fire is controlled by a 4 position gas tap mounted on the front leg of the appliance (see fig 1). In addition to the off position there is a pilot light and 2 heat control settings. As a safety feature all fires are equipped with a flame supervision device which will ...

  • Page 5

    5 fitting the ceramics place the front base coal in the burner compartment so that it rests on the ledges at the sides and front. Pull the coal forward sot hat it is immediately behind the front rim of the burner compartment. (see fig 3). Place the rear base coal matrix in the burner compartment beh...

  • Page 6

    6 place a single coal upon the two peaks of the coal matrix directly behind the centre line of the first row of coals. See figure 7. Place four coals, two each side of the centre coal directly behind the front row of coals (figures 8). Place the remaining four coals behind the second row of coals, t...

  • Page 7

    7 cleaning note: before attempting any of the following ensure that the fire has been allowed to cool completely. Note: some discoloration of the coals is normal. The metal parts of the fire should be carefully cleaned with a damp cloth and then polished with a dry cloth. On no account should any me...

  • Page 8

    8 a) your post code. B) type of fire. C) model/name. D) serial number. E) the fault, problem or request. General advice about gas and your gas fire: valor adviceline 0345 626341. To report faults or arrange for your fire to be serviced: valor service 0121 386 6203. To order spares or for sales infor...

  • Page 9

    9 safety first . Valor fires are ce approved and designed to meet the appropriate british standards and safety marks. Quality and excellence. At the heart of every valor fire. All valor fires are manufactured to the highest standards of quality and excellence and are manufactured under a bs en iso 9...