Valor Churchill LFE Owner's Manual - Owner’S Guide
OWNER’S GUIDE
Page 9
Figure 5. Window removal
Figure 4. Window surround removal
CLEANING
To maintain the high performance and
quality finish of your gas fire, please follow
these guidelines:
• Before attempting to clean the fire,
please remember to turn off the fire and
wait for the appliance to cool. The fire
will retain heat for some time before
cleaning can begin.
• If any pieces of debris are found in the
fire box, have the chimney inspected
before further use.
Metal Parts
• Clean the metal parts with a slightly
damp cloth and then dry.
• Do not use abrasive cleaners as these will
scratch the fire surface.
Window Glass
• Remove any stains on the window with a
non-abrasive cleaner such as a ceramic hob
cleaner. Do not use abrasive cleaners.
• The fire has been designed to so that you can
remove the window without having to call in
a service engineer. This allows you to clean
the inside of the window.
To remove the window:
1. Detach the window surround by sliding it upwards and then swinging the bottom
forwards. Lift and store carefully. See figure 4.
2. Remove the window unit by turning the screws each side of the window frame ¼ turn
anticlockwise. A screwdriver is provided with your fire for turning the screws. Lift
the window unit clear. See figure 5.