Valor Fires Carlton Installation Manual - Do I Need Any Tools?
ASSEMBLING THE HEARTH AND SURROUND.
The installation of this Surround / Mantle and hearth requires a reasonable level
of DIY skills.
Please read this guide thoroughly before commencing installation and if in
doubt, seek help from a competent person.
Do I need any tools?
You will need the following tools :
A Pozidrive / Phillips / cross head screwdriver. This should have a number 2 size
tip.
A power drill (preferably with hammer action) and a suitably sized masonry drill bit
for the wall plugs supplied.
How to assemble the suite.
Step 1
The top of the hearth has four round
holes. Locate and screw the cam bolts
into these holes as in figure 3.
Step 2
The bottom of the mantle / surround has four
holes that line up with those in the hearth. Lift
and locate the surround / mantle onto the cam
bolts. Insert and tighten the four cam locks as in
figure 4.
Page 5
INSTALLATION GUIDE
© Baxi Heating U.K. Limited 2010.
Figure 3.
Figure 4.