Valor GV60NTK Installation & Operation Instructions

4003044-02

Current room 

temperature

Current time

Back cover label

G6R-H3D6

Valor 

logo 

only

© Copyright Miles Industries Ltd., 2011.

For use with Valor GV60 PLUS or MAX* Remote Control Systems ONLY

www.valorfi replaces.com

Non-Thermostatic Handset

The handset GV60NTK is used with the Valor GV60 

PLUS or MAX

*

 receivers to turn the fi re on or off 

and the set the fl ame height. It has no thermostat 

or programming functions and it does not shutdown 

automatically. The handset shows the current time and 

the room temperature.

*

NOTE: The handset GV60NTK does not operate 

the fan control, the lighting control or the duplex 

burner fi replaces with GV60 MAX systems.

Synchronizing the NT handset to the remote 

control receiver

The receiver and the handset of the remote control sys-

tem must be initially synchronized before the fi rst use 

of a new handset.

1.  Insert alkaline batteries in the remote control 

receiver and handset. The receiver is located left of 

the control valve under the burner module.

2.  With a sharp object, press and hold the receiver’s 

reset button until you hear one short and one long 

beeps. Release the reset button after the second 

beep.

3.  Within the subsequent 20 seconds, press the small 

fl ame button (     ) on the remote handset until you 

hear two short beeps confi rming the sychronization 

is set.

This is a one time setting only and is not required when 

changing the batteries in the remote receiver. The 

remote control system is now ready to use.

INSTALLATION & OPERATION INSTRUCTIONS

GV60NTK

Non-Thermostatic Kit

• 

The one-hour feature is maintained when using a 

1265WSK wall switch.

• 

One handset can be used to synchronize multiple 

receivers to activate the one-hour feature.

• 

Synchronizing the receiver again with a thermostatic 

handset will reactivate the thermostat, programming 

and auxiliary functions.

The non-thermostatic 

(NT) handset is 

identifi ed with a Valor 

logo only. It shows 

the current time and 

room temperature. 

The number shown 

on its back cover 

label is G6R-H3D6