Valor Heartbeat OXYSAFE 2 Owner's Manual

Page of 10

Download

Print this page

Bookmark us

600B687/10

OWNER’S GUIDE

THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20)

THIS APPLIANCE IS FOR USE IN THE UNITED KINGDOM (GB) AND THE

REPUBLIC OF IRELAND (IE) ONLY.

This guide is intended to help you care for your Valor gas fire. Please read thoroughly

before using and keep for future reference

We trust that this guide gives sufficient details to enable the your appliance to be

operated and maintained satisfactorily. However, if further information is required, our

Valor Technical Helpline will be pleased to help.

Please telephone 08706 061 065 (National call rates apply).

This guide to be left with the owner

Heartbeat

OXYSAFE 2

MODEL 339

(GC No. 32-032-29)

LIVE FUEL EFFECT

GAS FIRE

1 2 3 4 5 6 7 Next › »

Summary of Heartbeat OXYSAFE 2

Page 1
600b687/10 owner’s guide this appliance is for use with natural gas (g20) this appliance is for use in the united kingdom (gb) and the republic of ireland (ie) only. This guide is intended to help you care for your valor gas fire. Please read thoroughly before using and keep for future reference we ...
Page 2: Owner’S Guide
Owner’s guide page 2 safety first. Valor fires are ce approved and designed to meet the appropriate british standards and safety marks. Quality and excellence at the heart of every valor fire. All valor fires are manufactured to the highest standards of quality and excellence and are manufactured un...
Page 3: Owner’S Guide
Owner’s guide page 3 list of contents safety ..............................................................................................................................3 appliance dimensions............................................................................................5 operating you...
Page 4: Owner’S Guide
Owner’s guide page 4 do • have the fire installed by a competent person. In the united kingdom, installation must be in accordance with the latest edition of the gas safety (installation & use) regulations. In the republic of ireland, installation must be in accordance with all national and local re...
Page 5: Owner’S Guide
Owner’s guide page 5 don’t • hang clothing, towels or any other fabrics over the fire. • fill in the space behind the case. • use the fire with a damaged coal piece or with the coal incorrectly positioned. • use the fire if the glass window is damaged. • allow any combustible material (e.G. Wallpape...
Page 6: Owner’S Guide
Owner’s guide page 6 operating your fire please note when operating your fire for the first time, some vapours may be given off which may cause a slight odour and could possibly set off any smoke alarms in the immediate vicinity. These vapours are quite normal with new appliances. They are totally h...
Page 7: Owner’S Guide
Owner’s guide page 7 figure 3 lighting with a taper • the burner settings are; 1/ign...........Centre section on low. Outer sections off. 2....................Centre section fully on. Outer sections off. 3....................Centre section fully on. Outer sections on low. 4....................Centre...
Page 8: Owner’S Guide
Owner’s guide page 8 fig. 5 window removal fig. 4 window surround removal cleaning to maintain the high performance and quality finish of your valor fire, please follow these guidelines: • before attempting to clean the fire, please remember to turn off the fire and wait for the appliance to cool. T...
Page 9: Owner’S Guide
Owner’s guide page 9 ceramic coal • this product uses a fuel effect piece containing refractory ceramic fibres (rcf), which are man-made vitreous silicate fibres. Excessive exposure to this material may cause temporary irritation to eyes, skin and respiratory tract. Consequently, it makes sense to t...
Page 10: Owner’S Guide
Owner’s guide page 10 maintenance regular maintenance in order to achieve and maintain high levels of personal safety and performance efficiency, it is essential that the opening at the back of the fire and the flue are kept clear of any form of obstruction. It is possible that deposits of mortar or...