Valor HORIZON 645CFV Installation Instructions Manual
4002225-05
645CFV Clearview
Vintage Iron Front Kit
Installation Instructions
CSA approved for use with Valor Models 534I Heaters ONLY
Note: This kit must be installed
by a qualifi ed installer, service
agency or gas supplier. These
instructions are to be used in
conjunction with the fi replace
main installation instructions.
I N S TA L L E R
Leave this manual
with the appliance.
C O N S U M E R
Retain this manual
for future reference.
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
WARNING
!
A barrier designed to reduce the risk of burns from the hot viewing
glass is provided with this appliance and shall be installed
for the protection of children and other at-risk individuals.
H
ORIZON
The 645CFV Horizon Clearview Vintage Iron Front is designed to be used on
the 534I Valor heaters.
Mantel clearances are unchanged from those shown in the 534I installation
manual.
Overview
(Heater and fret sold separately)
534I
Heat Exchanger Cover
Heat Baffl e
Window
Bolts
Cover
Barrier
Screen
Fret
Clearview Front
*NOTE: Bottom of plate is flush with
bottom of heater. Install bottom of
heater flush with finished hearth.
1-1/2”
(38 mm)
Appliance
outline
37-1/4” (946 mm)
31-1/4”
(794 mm)
2-1/2”
(64 mm)
© Copyright Miles Industries Ltd., 2013
Note: Wall fi nish must be fl ush or slightly
in front of this frame on heater!